-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by mclareniak
-
-
Now I understand. So it pushes at 50, but when I select 50 on the display, it actually pushes 25.
Thanks for the explanation. -
So, the temperatures work, but the hotbed first heats up and then the hotend heats up.
Here it is written
https://community.ultimaker.com/topic/26391-start-heating-bed-and-extruder-and-level-bed-at-the-same-time/
I still have to find out why he is not pushing at 50 but at 100.
-
Yes, I'm set to Marlin.
I attach G-code, maybe it will help to locate my problem. -
Hello.
Excuse my weak English, I use a translator. I have a problem with my CR-10S PRO. I'm printing from a MicroSD card. The printer does not download all the settings I set in Cura. For example, the hotend temperature and print speed, I have to set the printer before each print. In Cura I have set the temperature for the first layer of 200 ° C and for the other layers the same. When I enter to print, the temperature is 0 ° C and I have to manually set 200. In Cura I have set the print speed to 50, but the printer is set to 100 and I have to manually set 50.
In Cura it is possible to set different versions of G-code. Which is right for my CR-10S PRO?
Thank you for your willingness.
Does not download settings from Cura
in UltiMaker Cura
Posted
Hello.
So I found out that in Cura I set the speeds as follows:
first layer 25mm / s and other 50mm / s.
But the printer prints everything at 25mm / s.
Can't you tell me where it's wrong?
Well thank you.