I'm stumped. Printing with .8mm nozzle, Cura Slicer 4.4.1 using 3d model created in Fusion360.
So I printed a large section of a boat hull using PLA that has a wall thickness of 2.4mm so it's three walls thick using the .8mm nozzle at .32 mm layer height and wall speed 30mms.
Nozzle temp 210. Fan on. Retraction 6.5.
The print came out great except for one side that appears to goop up or not extrude all the way.
As mentioned earlier the opposite side is fine. Not sure if it's the slicer, stl file or my printer. When I preview the slice it looks fine.
Any ideas would be greatly appreciated. Thanks Alex.
