[Peek 400°C not able to slice]

Ok thanks.

I will try and if it does not work I will give a less dinky answer with some more suffisticated informations 😉

 

 

[Peek 400°C not able to slice]

Didn't work.

 

It seams that the material is not the only case. It fills in 400°C but the it is still red. There must somthing be like Machine max temp settings somwhere!?

[Peek 400°C not able to slice]

Wow thank you very much! I will try this asap.

[Peek 400°C not able to slice]

I found following json on the outdated Intamsuite software for the Funmat HT.

 

But I can't find any information on the maximal nozzle temperature.

 

Can you help?

 

 

funmatht.def.json.zip

[Peek 400°C not able to slice]

Hi guys 

I just configured it as a generic printer. no def.json ore something. 

Normally the Intamsys Funmat HT Printers use an older version of Cura. But this is to old for me. So i wanted to use the same version as on the other printers I own. Therefore I setup the printer in the newest version of Cura. 

 

"Custom FFF Printer" this is exactly what i used 🙂 

So therefore I would ask, how can i write a custom file for only this printer? And where can i edit/replace/copy a file to do so.

[Peek 400°C not able to slice]

gr5 thank you very much for your effort to help.

I know that this would be a solution, but i would like to have solution which is in the normal pipeline.

It is very annoying, if i have to edit the code for one printer while i am working with ten others in the same time. ;-)

 

 

[Peek 400°C not able to slice]

Hi there

I tried to slice my file with the temperature of 400°C but cura tells my that my temp is to high. I own a Funmat HT which can handle this temperatures.

I have searched all over cure to setup the max temp for the nozzle but could not find it. How can i setup the right settings?