[Edit/create gcode question]

Hi,

Thanks for your prompt reaction. Those days I voluntired to print a part for a face sheild  fused by the coronavirus fighters using an STL file I received. The problem is that when printing ends the nozzle is near fo touching the surface of the print and makes difficult to remove the part. I'm interested to add/change the last Gcode before printing stops so, the hotbed will move 20 - 30 mm from the  product surface. I do not know how to see the "Gcode edit" window.

Your kind help will be more than appreciated.

Abraham Gome

[Edit/create gcode question]

Sorry, I'm not an Ultimaker owner.Two years ago ( when I was 80 )  I decided to start with 3D printing as my new hobby. Recently  I stopped using the Repetier-Host and started to use Cura 4.2.1 and I would be very grateful to get some help.

Since  started to use Cura 4.2.1 I can not edit, to add a G code....., and hope to find here the help I'm looking for.

Best Regards,

Abraham Gome

[add /change stop printing gcode cura 4.2.1]

I'm a new user of cura . When printing ends the nozzle is touching the surface of the print.How can I edit and insert an additional Gcode to move the nozzel far from the print surface.?

Thanks,

Abraham Gome