[Ultimaker 3 cannot connect to WiFi]

July of 2020. We got an Ultimaker S5 last year and the WiFi connection never worked for longer than a few days. I am with the other people posting in this thread. For a 4.5k price, we could have bought a much better printer that justifies the price.

[ABS Material Does Not Come off Glass Tray on Ultimaker S5]

9 minutes ago, D95 said:

I started using pink aquanet hair spray back with my UM 2+ to get ABS to stick, and have migrated to using it even for my PLA projects. 

Remove glass plate and clean with Windex. Dry whole area off well so no windex residue remains, or hair spray will bead up.

Soak the glass plate with hair spray THICK until a clear layer forms on glass. Wipe off corners where clips hold.  Place the glass back in printer, and pre-heat the base plate to 60C until dry.  Acts like a self leveling compound for the glass. Then run your print once dry in ~5 minutes. Have had zero adhesion issues, glass damage, or self leveling issues with my UM S5 or 2+.  Do a fresh windex clean and re-coat with hair spray before any 2-3 day print. Worth the time. Buy the hair spray in bulk because you will use a lot once hooked. Good luck

You didn't get it. I am having the opposite problem.

[ABS Material Does Not Come off Glass Tray on Ultimaker S5]

Hello,

 

We have an Ultimaker S5 printing with ABS. After the print is done, only putting the tray inside the freezer facilitated taking the printed part off the glass tray. Any advice?

 

Thanks,

Diego