-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Deses
-
-
5 minutes ago, Framar said:
Oh I see... with that option disabled it doesn't print anything so the best approach here would be to make that part a little bit thicker so it can print a full wall, right? I'm going to do that now.
Thank you very much!
-
Hi!
I have a small circular feature with a hole in the middle for a M3 screw to screw on, and I was checking the preview and found that it was following a weird movement pattern. I have a wall thickness of 1.2 (3 walls with a 0.4 nozzle) and these features are 1.88 mm thick, so they should be printing in a solid block...
How do I make so it prints in a circular motion rather than that jerky mess?
Here's a video of my issue for more clarity and below is a picture of the meaning of each color:
https://www.dropbox.com/s/qjmnpsbwkwyl6qr/video_2020-05-13_04-51-32 compressed.mp4?dl=0
Small circle is printing with a weird movement
in UltiMaker Cura
Posted
Right, good to know!
So far I've fixed my issue by modifying the model so it's thicker and there's any gap.
Thank you for the help!