n2d7
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by n2d7
-
-
I am looking to use Cura with Makergear M3-ID dual extruder 3D printer. I am currently using Simplify3D (makergear provides printer profile for simplify3d) which works well. But I would like to try out the different infill patterns that are available on Cura. Has anyone developed a Cura printer profile for M3-ID?
Otherwise, how would I start to write my own printer profile for Cura -
I checked. I couldn't get any prints with the specified settings. I tried with many temperature and speed combinations and the best I got from using 250C. At 230 C, the prints suffer from heavy under extrusion that the flow stops completely after a while.
I tried the same print with just changing the temperature only 250 and 230, and the 230 print stops due to under extrusion.
-
I am trying printing with the Ninjatek EEL filament with my Ultimaker s5 and I was not able to get any good prints at all. Initially, I used the specified settings with 230 C temp and 20 mm/s speed, which led to failed prints due to under extrusion. I was able to get some prints with 250 C temp and 10 mm/s speed, but the prints are have very flaky like texture (as shown in the image) and kind of brittle.
Since I am using an Ultimaker which has a bowden drive, it may not be the ideal printer to print with flexible filaments. And I was wondering if someone have experience with using it with a direct drive as well.
Can someone recommend me on how to print successfully with the EEL filament?
New infill patterns in experimental Cura builds
in UltiMaker Cura
Posted
Hi, Sorry for being naive, but where can I find the code for Schwarz P infill implementation? I was going through the github files and couldn't find it.
I would like to try implementing few custom infills, and was hoping to get direction from the your implementation.
Many thanks!