Nail
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Nail
-
-
Just printed 2 models, one with 45 degrees rotations
Both stand vertical. Travel speed - 200 mm/s
But - this models are 'empty', 0% filling, so only shells
Next time I will try with less travel speed. Maybe alot of fast pulls/pushes shift cheap printer's mechanic
It happens in less wide side, where accelerarions are more high
-
I tried to find and found same XY moves on different layers of Cura code and it seems - no shifts
But - it occurs again and again
-
I did not print exactly this code, just generated from saved .3mf
It is for 1 mm nozzle, before I printed with 0.4 mm with the same 'success'
SolidWorks file is presented too, in ZIP
-
At first I thought that this happens due to printer's mechanical fault - even changed X and Y motorsInclination continued on Y axis
But then I rotated the model on 90 degrees in Cura and produced new GCode - inclination happens on X axis
So - it is Cura's wrong code issue - same STL (made on Solidworks) is Ok printed on Simplify3D G-code
But - I prefer Cura !
I also imported model from SolidWork file using Cura pugin - the same inclination
Inclination
in UltiMaker Cura
Posted
with such slow motions - no inclination
thanns