-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by HillbillyHydrographics
-
-
Hello all, Post 1.
Thought I would start here since I just completed my first print tonight with what seems like abnormal ease. I can only attribute the success to either the printer or the filament but based on customer reviews I suspect it's the materials.
So here's the run down
Printer: AnyCubic Mega Zero, Fully stock, No heat bed, No Enclosure www.anycubic.com
Filament: Atomic Filaments, USA, Crystal Clear/Natural PETG PRO, $32.99, 1kg Roll,
Recomended Settings: Nozzle Temp - 232 to 245C, Bed Temp - 60 to 70C,
File: OWL
Total Print Time 4.5hr
Actual Print Settings: Speed - 45mm, Nozzle Temp - 245C, Fan - 49% (125/255), Flow - 100 (defaut)
The results were nearly perfection after the first 5 minutes. I had a user error on my part which is what caused some minor curling on the initial adhesion layer but after that it was flawless.
- 1
Atomic Filament, USA PETG PRO
in What have you made
Posted
Thank you. That's a definite upgrade comming in the near future, along with an enclosure. Though it hasn't been a issue with running PETG, yet. But for what I do, ABS will work and costs a fraction of the price. So far I have no complaints. With the filament or the printer.