![](http://content.invisioncic.com/ultimake/set_resources_16/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
igniparra
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by igniparra
-
-
3 hours ago, Framar said:
I've noticed that when I printed at slower speed I got better layer adhesion.
Thanks! I will try that, also to prevent blobs and boogers...
On 8/14/2020 at 4:54 PM, tinkergnome said:Not necessarily, but it helps of course.
Don't use the part cooling fan for those big objects and try a different filament first.
If this is "silver", use a different color - i don't know why, but these glittering additives make it much more worse.
The other one I bought was Cobalt... A lot worse than the silver one...
Yes, we don't get quality filament in Argentina, but I wanna get the best results with what I get, and I think I can do better by tuning the settings.
Thanks! -
-
Hi guys!
I figured it out... Turns out I had misclicked when disabling the steppers to calibrate, and saved an offset in the Z axis. When I leveled it was ok, because I had it placed at the 0 of the machine (with Auto Home), but then when it started printing, that Z offset was sticking it too close to the bed.
Sorry it wasn't software related, I'm super new in this, and it's a lot harder than I initially thought it was going to be.
And I'm loving having to learn so much about how to print, even more than actually printing.Thanks a lot for your comments!
-
-
Hi Guys! I recently purchased an Ender 3 Pro, and I love Cura for a Slicer. But my first layer is super thin, and even though it sticks on the bed, it gets really hard to take out, and sometimes it does weird things on the first layer.
It looks like it isn't enough plastic.
I've adjusted the bed with the paper pinching technique, and I think I got it right.
In all your expertize, who's fault it might be (in the end my fault of course), my slicer settings, my printer assembly, the rubbish plastic we can buy in Argentina, the e-steps?
I don't know what else to change. I'm now testing PET-G for the first time, and it behaves the same as PLA.Thanks!
Layer Splitting PET-G
in Improve your 3D prints
Posted
this is awesome advise Carla, will try all those tips and let you know.
Thanks!