[From mirco SD to USB 2.0]

38 minutes ago, Smithy said:

That reminds me of the Gardena / HDMI adapter 🤣

 

HAHA, to bad it can't be done

[From mirco SD to USB 2.0]

Dear people,

 

My 3D printer takes a micro SD. My PC takes a USB2.0.

So every time I have to put this microSD cart in a little usb stick that I can put in my PC.

So what I would like to add to the printer is a USB 2.0 slot.

 

What I need for this is a cable that goes from microSD to USB2. I can not find this online, can someone make a recommendation?

 

The housing for these cables I can just print of course and attach to the printer.

It would be nice if it is possible if I can turn the one microSD slot into multiple slots (microSD, USB2, USB3, SD).

 

Thank you!

[Ultimaker 2 Pro won't print solid]

They removed the material, so I don't have any information. Apparently I have to bring my own material from now on.

Thank you for the information! "PLA only" printer (AFAIK) - diameter (2.85mm)

 

Beside from the material, is there something in the "Dual Extrusion" settings that I have to ensure?

[Ultimaker 2 Pro won't print solid]

Thank you for your replies.

It does the same with 100% or less infill. With less than the grid is also these wisps, see photo.

 

It sais "Ultimaker 2 Go", not "pro", sorry.

The material is plastic? I'm not known with the component of the printers, I just know a little bit how to use them. It is not my printer, I just use it. I don't know what nozzle, sorry.

I have done the same thing with a other printer in the past, ant that worked fine, now I use this one and it doesn't work.

I first make the model in SketchUp, than open that in CURA and make it a gcode. See attachments.

 

I do not know if this printer has worked ok in the past. This does however now happen to all prints I try with this printer.

What I have tried is changing settings in CURA, like Wall Thickness, Top and Bottom Thickness, Infill ofcourse, Speed.

 

I have not changed anything in "Dual Extrusion", those settings seem to complicated for me.

Does someone recognize this and knows what I have to change?

 

UM2GO_schakelaar alles v2.gcode schakelaar alles v2.stl

[Ultimaker 2 Pro won't print solid]

Hello,

 

I try to print a solid thing but it just prints in these wisps. The walls, the invul, everything. How can I make it just solid?