[4.7 is now auto bed leveling on every print?]

It was causing issues where I would level the bed and then the auto level was reading differently when the printer did it before each print

See above comment on how I disabled it

[4.7 is now auto bed leveling on every print?]

13 hours ago, GregValiant said:

I'm big on work-arounds.  Hopefully somebody will drop by and explain how to keep the G29 from being added.  In the mean time...

 

In Cura go to Extensions / Post-Processing / Modify Gcode and in the dialog box select "Add a Script".  From the list select "Search and Replace".  In the "Search" box put G29 and in the "Replace" box put ;G29 .

All G29's in the file will be commented out.

 

This worked PERFECTLY!  Thank you so much for the help!!!!

[4.7 is now auto bed leveling on every print?]

But how do I stop this all together from bring in the gcode?  I don't want it at all... No matter what the proper code is

[Cura settings explained]

This is a great guide!  Thank you so much!

[4.7 is now auto bed leveling on every print?]

I installed the 4.7 update last week and now my Creality CR10S Pro does an auto bed level now at the start of each print.  How do I disable that?
note that in my attached images, my Gcode shows that G29 auto level command, but my machine settings do not have that setup.

 

This action never occurred prior to 4.7 and I have poured over the settings unable to find where this new line in the GCODE is being set.

 

 

[Ultimaker Cura 4.7 is available!]

I installed the update, but on my Creality CR10S Pro it does an auto bed level now at the start of each print.  How do I disable that?
note that in my attached images, my Gcode shows that G29 auto level command, but my machine settings do not have that setup.

[Ultimaker Cura 4.7 is available!]

I installed the update, but on my Creality CR10S Pro it does an auto bed level now at the start of each print.  How do I disable that?