robmar58

Hi all, I use to print small precision parts with .1 mm layers and .2mm nozzle. They are about 100x30 mm and 4mm thick boards. Now, I need that just the top 5 layers be printed very accurately, all the bottom ones being just a kind of support but with no need for any accuracy. So, in order to speed up the print without wasting time on lower layers, I was wondering if there's a way to differentiate quality, and hence speed, between the lower 35 "rough" layers and the top 5 accurate ones. Thanks in advance for any suggestion! Roberto

Hi, I had the same issue trying to define the nozzle diameter, and solved it with a workaround by defining a new custom printer. This way the nozzle diameter entry field becomes enabled. After that, you'll have to enter all the remaining configuration parameters by copying them from your original printer's config and finally renaming the custom printer with the name of your choice.