Jump to content

higgs_bozo

New member
  • Posts

    1
  • Joined

  • Last visited

Posts posted by higgs_bozo

  1. I recently got an Ender 5+ and encountered this problem as well when i started using Cura. 

     

    Below is the solution I came up with. It's not perfect but it does the job:

     

        Original GCode snippet to replace:

                G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
                G1 X10.4 Y200.0 Z0.28 F1500.0 ;Move to side a little

     

        Replacement GCode snippet:

                ; note:  - replace the Y value to something that matches your printer dimensions

                ;            - i used Y300 because my printer has a max Y of 350

                G1 X10.1 Y300.0 Z0.28 F1500.0 E15 ;Draw the first line, included only coz i changed my Y value
                G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Bug happens here, set E0 to stop extruding while bug happens
                G1 X10.4 Y300.0 Z0.28 F1500.0 E0 ;Do prev cmd again, move works now but E0 still

                ; the code after this works normally

     

     

    • Like 1
    • Thanks 1
×
×
  • Create New...