[Size issue when printing on Ender3 with cura 4.8.0]

Done. 😀 Hope it will help everybody.

https://www.thingiverse.com/thing:3581913

[Size issue when printing on Ender3 with cura 4.8.0]

Thanks for all you replies !

Design is not from me, I found it on thingiverse.

Height is not an issue so it fix the issue after move the Z little down

I can now see correct brim over the piece

Will pm the designer to avoid any other people to do same error, to print it straight forward (without move z down first).

 

Which slicer did you use ? I personally prefer cura but also tried prusa slicer.

[Size issue when printing on Ender3 with cura 4.8.0]

Youre absolutely right, I realized that after rotate.

I prefer having an issue with the stl file ratrher than with cura.

Is there a way to fix it ? I mean, except move the Z to -0.2 ?

Many thanks

[Size issue when printing on Ender3 with cura 4.8.0]

Hello, thanks for you quick feedback.

Please find attach the 3mf file.

 

width is good (Y axle)

length is bad (X axle)

CE3_Resource and Animal holder.3mf

[Size issue when printing on Ender3 with cura 4.8.0]

Hello friends,

 I have noticed an issue when trying to print a part with 18cm size on my Ender 3.

When printing gcode generated from cura 4.8.0 slicer it it is reduced to approx. 15cm.

I don't understand why this is hapenning, Had to use PrusaSlicer to print this stl file to keep good size.

I allready tried other older version of Cura with no luck, same issue reoccurs.

 

Please find issue in screenshot, skirt is representative of final size.

 

Any help will be great.