ConanGuy

I try with the Z Offset plugin (-0.2mm for me) and it seems to work for the moment. I will let you know if it solves the issue. EDIT: Works fine with the offset 🙂

I have the exact same problem with my Ender 3 Pro. Here is my gcode :) ... ;Generated with Cura_SteamEngine 4.8.0 M140 S65 M105 M190 S65 M104 S210 M105 M109 S210 M82 ;absolute extrusion mode ; Ender 3 Custom Start G-code G92 E0 ; Reset Extruder G28 ; Home all axes G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish G92 E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:508 ;LAYER:0 M107 G0 F6000 X75.651 Y108.659 Z0.12 ;TYPE:SKIRT G1 F1500 E0 G1 F1200 X76.119 Y108.368 E0.011 G1 X76.624 Y108.147 E0.022 ...