[First layer looking weird]

I am now trying to print in swapped colors. As i can see in the Preview it should be doing the eyes and teeth first. I will abort the print a few layers in and try it with loading the .stl files in a certain order as you said. If that doesnt work i am just gonna swap the colors. 

 

I will keep you updated, thanks again for the quick and helpful replies. 

 

5 minutes ago, gr5 said:

So to have the red stick out and downwards, it will look like crap.  The black will be up in the air printing over air and will fall down to the glass and be all like wheat chex instead of solid.  You need a 3rd extruder to extrude PVA for support.  I suppose there is a way to do that if you slice it two different ways, then splice the two gcodes together (with some g92 corrections and temp change corrections) and you change the filament from pva to black part way through.

 

No - that's really really crazy.  Much too complicated (tons of gcode editing by hand).

 

 

Ummmm. I think i will need to learn to use cura first :D but thanks for the explanation :)

[First layer looking weird]

Thank you for the Quick answer. I thought about glue but i need to make 20pcs so that would take quite some time. 

They will still take it if it is only one one side, but i told them i will try my best to print it on both sides. Also it is a good training, the more difficult thing try the better i will get. 

 

Is there a setting in Cura where i can tell it which one to print first? Cant fint any setting related to that :(

[First layer looking weird]

Hello

 

I am currently printing a Badge for someone. They want the Logo to stick out at the Top and on the Bottom. Since i cant make it stick out on the bottom, i want it flat on that side. However it just looks weird. I tried changing the inital layer with to 100% but didnt do anything. Any ideas? Top image is how it looks on the bottom, bottom image is how it SHOULD look.