squire
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by squire
-
-
So when I print lower than 0.08mm layer height it get this weird infill issue check video;
using 0.2mm nozzle, it also seems to skip a few layers infilling as well
and this does happen during the actual print, using 4.9
-
-
So "Lift head" under "cooling" linked to "min layer time" mine was set to 3second and i changed it to 1sec seems to have resolved it
-
I have same problem on 4.8 and tried 4.9
it seems to based on the size of layer?video of the issue
https://puu.sh/HzStM/a18de76759.mp4
LAYER:93 ;MESH:Network Port keystone to round hole 23mm-rev5.3MF G0 X111.52 Y126.641 Z14.14 ;TYPE:WALL-INNER G1 F2400 E591.28178 G1 F720 X108.48 Y126.641 E591.33865 G1 X108.48 Y126.332 E591.34444 G1 X111.52 Y126.332 E591.40131 G1 X111.52 Y126.641 E591.40709 G0 F7200 X111.8 Y126.921 ;TYPE:WALL-OUTER G1 F600 X108.2 Y126.921 E591.48118 G1 X108.2 Y126.052 E591.49906 G1 X111.8 Y126.052 E591.57315 G1 X111.8 Y126.921 E591.59103 G0 F7200 X111.6 Y126.921 G0 X111.437 Y126.558 G0 X111.22 Y126.341 ;MESH:NONMESH G0 F600 X111.22 Y126.341 Z14.29 G0 F7200 X111.52 Y126.603 ;Small layer, adding delay G1 F2400 E584.59103 G0 F7200 X111.52 Y126.603 Z17.29 G0 X107.958 Y146.284 G4 P1514 ;TIME_ELAPSED:1312.784228 ;LAYER:94 ;MESH:Network Port keystone to round hole 23mm-rev5.3MF G0 X111.52 Y126.603 Z14.29 ;TYPE:WALL-INNER G1 F2400 E591.59103 G1 F720 X108.48 Y126.604 E591.64791 G1 X108.48 Y126.53 E591.64929 G1 X111.52 Y126.53 E591.66327 G1 X111.52 Y126.603 E591.66464 G0 F7200 X111.8 Y126.883 ;TYPE:WALL-OUTER G3 X108.200 Y126.884 I-3.518 J-6182.999 E591.73873 F600 G1 X108.2 Y126.719 E591.74092 G1 X108.2 Y126.25 E591.75057 G1 X111.8 Y126.25 E591.82466 G1 X111.8 Y126.883 E591.83769 G0 F7200 X111.6 Y126.883 G0 X111.5 Y126.583 ;Small layer, adding delay G1 F2400 E584.83769 G0 F7200 X111.5 Y126.583 Z17.29 G0 X107.991 Y146.274 G4 P1623 ;TIME_ELAPSED:1317.606390
Odd infill issue with 0.05mm layer height
in UltiMaker Cura
Posted · Edited by squire
yeah you're right , i did forgot to change it xD so at 0.08/0.05 it stay 0.13, so changed it to the same height as the layer height it thought it was linked but yeah that fixed it
im dumb.