aaronvandagriff

okay I also did more research and now flashed the drive using the jysper but still have the same issue so. I'm not sure what to do. I have looked at the wiring and it seems that they are all connected correctly. I think for what ever reason the end stop is not getting the signal that it is being pressed as if the wiring wasn't hooked up. I have thought about switching the x and y axis on the board to see if the end stop isnt working. I'm not sure what to do with the codes you have because cure will not let me copy and paste.

with the extender it is now 400mm x 400mm x 250mm. I'm willing to try anything at this point. I don't have anyone to take it to or personally ask. I'm using Ultimaker Cura as that is what came with the ender 3 v2 when I got it last year.

So I actually found that I did not have the latest update of cura. I updated and now it tries to home out but hits the end stop on the x axis then will not do anything else. I don't know if me adding the g code made it do this so i have thought about taking the M211 S0 out and trying that. The instruction said that the printer would stop it self if that code was in there. I'm kind of getting aggravated with it because I can not find anything on how to solve. If there is some way I can help you help me please tell me.

I have an ender 3 v2 and recently put the ender extender xl on it. I changed the parameters on the machine settings and set the code M211 S0; disable end stops right below g28 as per instructions. However when I try to slice something like a test cube it says that "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." Please help on how to solve this.