Foxtrix
-
Posts
13 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
3D Prints
Posts posted by Foxtrix
-
-
My Ender 3S1 has been doing that weird line on that specific print since I got it! My retraction settings are tuned in, and I'm using Gyroid infill with 30% infill. I attached pictures for another recent print I have done with the same problem! The picture shows the two opposite sides, and the line seems to go out of the print on one side and back into the print on the other. I cleaned what you suggested, and it slightly got better but the problem still persists. I also attached the GCODE, slicing it on Cura it also shows a straight line not the weird squiggle that shows in the final print.
-
-
I printed this letter Holder on my Ender 3S1 Direct Drive printer, I set the seam to be on the edges of the print and I did see the seam go along there. But what happens on prints that have a tall flat surface, it starts making a line where it slightly intends the surface. And on the top layer there's a little bump that doesn't match with the rest of the top surface!
-
Hello! I have been struggling trying to get my bed probing to work on my ender 3s1! On my printer the probe is working perfectly, and I have my calibrated my Z Probe position on the bed and I have made a 3 x 3 mesh. Just when I start a print my probe goes to the middle and probes once and goes to the side and starts printing! What do you think the problem is? Thank you for reading this!
Start GCode:
; Ender 3 S1 Pro Custom Start G-code G92 E0 ; Reset Extruder G28 ; Home all axes G29 ; ABL G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish -
Hello! I have had an Ender 3V2 for 2 years now with a glass bed and it worked great! I just got an Ender 3S1 and it included a brand-New Magnetic PEI bed. I modified my old Ender 3 V2 Profile to what the Ender S1 Needed. But I haven't been able to get my prints to stick to the bed great and if they do then the first layer comes out stringy and ugly. The rest of the print comes out great. My ABL is working. Does anyone have any Cura Settings to get the prints to stick to the bed and get a good first layer? I have tried cleaning the bed but it still won't work. If anyone has a good Ender 3S1 profile, could you share it with me? Thank you!
-
Yea, I would just change all the STL files into one cura profile that I would make.
-
Hello their! I was wondering how to slice multiple files at the same time with a other cura profile. I might get a new 3D printer and I have 152 files for selling on my store and I don't want to slice them indivually. Is there a way where I can add folders and Cura will slice it with a different Cura profile.
-
1
-
-
So I have an cr touch on my ender 3 v2 and when I try to print something it only goes to one of the 25 probe points that are on. I use Jyers UI. When I try to create a new mesh it only goes to one probe point and says save. it just started doing that yesterday and I don't know what could of happened. I flashed the firmware and reinstalled the orginal software then Jyers Ui again but It still has the same problem. I put in the correct mother board when downloading the software. Can you please help
-
Thanks you have been a great help ill send you a picture of the finished result
-
I am not new to Cura but I am new to having a ultimaker account I made one so I could ask things on forums
-
I have been using Cura for a couple of months now and yes I have tried using brim and I do have custom settings on to best suite my printer.
Did you just use normal supports?
Thanks so much for this response.
-
So I am trying to print this file and every time I come back to the print its most string and I have tried a lot of times. When I print something else on my printer it comes out fine so It has to do with the settings in this model. What settings should I make it so its Strong and slightly flexible and prints out like the model should. If you can slice it for me or tell me the settings to fix I would be so happy : D
Can you please help me solve this issue in my 3D Prints by helping me tweak Cura Settings
in UltiMaker Cura
Posted
I’ll try these things out thank you so much Greg the Valiant for your time!