Jump to content

sandisw

Dormant
  • Posts

    4
  • Joined

  • Last visited

Posts posted by sandisw

  1. I copied and paste both the start and ending gcode. everything works perfectly !! I really appreciate your help. Thank you so much 😊

     

    this is the result of my 1st benchy printed with cura. overall is good, just need a slight tweaking.

     

    material : ABS

    20220516_120021.jpg

     

    20220516_121942.jpg

    20220516_121953.jpg

    20220516_122216.jpg

    20220516_122828.jpg

  2. Hi, Sorry for the late reply , i  just got home.

     

    This is the Start Gcode i got from the developer.

     

    ; [mm] mode
    G21
    ; absolute mode
    G90
    G28
    M42 P7 S100
    M190 S<BED>
    M42 P6 S160
    M42 P6 S255
    G28
    M109 S<TEMP>
    M42 P7 S255

     

    and this is the End Gcode

     

    M104 S0
    M140 S0
    M42 P6 S0
    M106 S0
    G28
    M42 P7 S0
    M400

     

    do you see anything wrong sir ?

     

     

  3. i have Qubea QD-1X printer.

    With Kisslicer ( 5D absolute E Gcode ) everything is fine except there are 2 issues that bother me.

    1. crowning gap, gap that i can see to on kisslices

    photo : gap at the trunk corner behind the cabin.

    2. visible seams

     

    IMG-20220512-WA0018.thumb.jpeg.addcfd5fb40b2723fa6702bafeefee3d.jpeg

     

    so i decided to give cura slicer a try but my printer just wont start print anything.

    i copied the start and end gcode from kiss to cura.

    it can heat the bed , heat the nozzle , home all axis. after that the nozzle is going down to print area but it wont print anything. just stay in the middle of the bed.

     

    what Gcode flavour should i use ?

    Tried marlin & reprap but still not working.

     

    please help.

    Thank you

×
×
  • Create New...