[Possible bug in "Select face to align to build plate"]

It's a bug allright... (see video linked below)

 

Someone please help!

 

https://user-images.githubusercontent.com/11069622/197048489-d56bd281-5890-4309-a94b-3c710784f01a.mp4

[Build plate crash at end of print.]

We seem to have run into this exact issue today, not sure if it will relate but here's our story:

• Ultimaker S5 Pro bundle, Firmware 7.1.0
• A job had been submitted through the local network and started (Tough PLA on core 1 and PVA on core 2)
• I submitted another job from the digital library (ABS on core 1 and PVA on core 2)
• When the first job finished, printer did what has been described here, extruder moved to the left, did a cold pull routine for the Tough PLA on core 1, then moved to the right with the plate raised and oozing or extruding PVA from core 2; extruder hit the print and pushed the glass plate out of position; then it completed the cold pull on core 2 and buildplate lowered.
• Teammate thought the second job had started, but the printer had actually just done the filament "parking" routine, for some reason the plate raised between cold-pulls causing the crash instead of lowering buildplate first.
• Digital factory showed print done and waiting for cleanup, after removing print and adjusting plate, teammate touched on the "Print removed" button on the touchscreen and second print started normally.