[Flow rate changes in g-code in Cura 5.2]

Figured it out.  I had tested the script for a flow tower and forgot to remove the script.  Decided to post back so maybe can help someone else with the obvious. 🤪

[Flow rate changes in g-code in Cura 5.2]

I am currently printing an item that is 362 layers in height.  i noticed in the g-code that M221 S110 is inserted at layer 0.  This appears every 40 layers, reducing the flow rate by 2% each time.  By layer 360, the flow rate is at 92%.  I have checked every flow rate setting I can find, but do not see anything that would cause this.  Is there some purpose for this?

[cura is setting nozzle temp to 175 no matter what temp i put it at and my prints are looking like normal then everywhere(image provided)]

I noticed in version 5.1 of Cura, it now has a standby temp of 175 for pla.  It preheats nozzle to 175, then heats bed, then resumes heating the nozzle to print setting.  This is part of the start code in your machine profile.  Might want to see if this is part of issue.