![](http://content.invisioncic.com/ultimake/set_resources_16/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
dyeatman
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by dyeatman
-
-
I am using 5.7.0. I'll try 5.7.1 Thanks!
-
I created two parts that were near the max X limit (setting is for Ender 3 Max Neo 300x300) and the slicer won't accept it.
The original was 298mm in the X direction and 175mm in the Y direction that it wouldn't accept.so I reduced it down to 285mm and it still wouldn't accept it.
I then brought it down to 253mm, no luck. However, if I scale the 253 model in Cura to 95% it will slice.
The full size version slices with no problem in Creality Slicer and two others. The project I attached is the 253mm version.
Cura 5.7.0 won't slice a model that fits on the Ender 3 Max Neo build plate/says its too big
in UltiMaker Cura
Posted
I removed 5.7.0 and all its data files including the ones under AppDate then installed 5.7.1 It still won't accept the file at 100%. If I try to scale down from 100% to 99% it won't work. But if I scale it down to 95% then scale it up one percent at a time I can get it to 99% but not 100%.