mgraham

Another detail that may be helpful for Windows or Mac: The button did not work until I had plugged in a memory stick. Maybe that is all you need for Windows...

I should have prefaced, on a Linux system, I was able to get it to work. I can only tell the steps that worked for me: my media was mounted at /mnt/sdg1. replace sdg1 below with your media's "name" issue: following commands from a terminal. you may need to be root depending on system, or possibly use sudo before each command. #if /media/sdg1 does not exist issue this: mkdir /media/sdg1 #then issue the following commands umount /mnt/sdg1 mount /dev/sdg1 /media/sdg1 then after clicking on slice, when it finishes slicking, the button should say "save to removeable media" unless you have selected usb, then use the dropdown to the right of the button to choose "save to removeable media"

I had the same problem, but I finally got it working. It needs to have removeable media mounted under /media such as at /media/sdg1 where the device is /dev/sdg1 Then after clicking I get the button to say "save to removeable media"