mrGokhann

@gr5 Thanks for the reply. Let me give you some information about the printer. Printer: Ultimaker 3 extended version. Nozzle: AA 0.4 Filament: 2.85mm PLA MAX 3de Premium, Gun Metal, Print temp: 205-220C Printer Firmware: Updated to the latest version for 6 month ago. I use standart settings and the only thing i have changed is the infill which i have set to 100%. The file size is : 118mm * 74mm * 7.5mm Im adding a few pictures so its easier for you to see. Pic 1-2-3 shows the settings of the printer. Filament shows the filament 😄 Last picture shows the object my collague is printing today and as you see it printed a lot and will be finished in 7 hours. Its like the printer doesnt want to deal with me 🙂 Regarding the removing bowdens , cable and so on, we have done it last time i had an issue. Since then my two collagues printed perfectly, no error at all, so i do not believe thats the issue, because they would have faced the issue since then. Let me know what do you think about the settings.

@gr5 Thanks for the reply. Yes i have checked that page before. We bought new print core and cleaned everything and checked all the cables also to the sensor. If my collague print the same file on the same printer i use, than everything works. But when i print, i get the error 15 . Sometimes after 15 min or 30 or 45min.

hi all I had error 15 issue for long time and i havent been using the printer for a month. During this month, my collagues printed several times and they never seen this issue. Today i have printed again and faced the same issue. So i deleted the cura and restartet the pc and installed the latest version again and printed again but again same issue. Whats happening? I need help. Printer: Ultimaker 3 extended People who is using the printer are : 4 people People facing the error 15 : 1 ( ME 🙂 )