Estimados
Mi impresora es una Ender 3 NEO con bl touch (sensor de altura de cama) y un solo extrusor.
Hace unos meses imprimí en una misma capa con 2 colores modificando el Gcode. Funciono bien.
Ahora volví a intentar y el extrusor al ir a comenzar a imprimir raspa con el pico la cama.
Debo mencionar que desde la primera vez que imprimí ya actualicé varias veces Cura, pero el Gcode no se modifica (creo).
Aquí la parte inicial del Gcode para imprimir el primer archivo (primer color)
Esta parte no tiene ningún parámetro modificado.
; Ender 3 Custom Start G-code
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 Z5.0 F3000 ; Move Z Axis up a bit during heating to not damage bed
M104 S{material_standby_temperature} ; Start heating up the nozzle most of the way
M190 S{material_bed_temperature_layer_0} ; Start heating the bed, wait until target temperature reached
M109 S{material_print_temperature_layer_0} ; Finish heating the nozzle
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
Finalizar Gcode del primer archivo
;G91 ;Relative positioning
;G1 E-2 F2700 ;Retract a bit
;G1 E-2 Z0.2 F2400 ;Retract and raise Z
;G1 X5 Y5 F3000 ;Wipe out
;G1 Z10 ;Raise Z more
;G90 ;Absolute positioning
;G1 X0 Y{machine_depth} ;Present print
;M106 S0 ;Turn-off fan
;M104 S0 ;Turn-off hotend
;M140 S0 ;Turn-off bed
;M84 X Y E ;Disable all steppers but Z
;dos capas
M140 S60 ; mantiene la capa caliente a 60°
M104 S200 ; mantiene el extrusor a 200° para que no se enfrie
G1 X10 Y10 Z10 ; mueve el extrusor a una esquina para cambiar de filamento
G1 E-60 ; retrae el filamento 60mm para cambiarlo
M300 S440 P200 ; pitido de aviso
Se utiliza la parte en rojo
Ahora el Gcode del 2do archivo (2do color)
Inicio
; Ender 3 Custom Start G-code
G92 E0 ; Reset Extruder
;G28 ; Home all axes
G1 Z5.0 F3000 ; Move Z Axis up a bit during heating to not damage bed
M104 S{material_standby_temperature} ; Start heating up the nozzle most of the way
M190 S{material_bed_temperature_layer_0} ; Start heating the bed, wait until target temperature reached
M109 S{material_print_temperature_layer_0} ; Finish heating the nozzle
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
Se desactiva la linea en celeste, esto impide que el sensor de la cama actue.
Parte final del Gcode
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
;dos capas
;M140 S60 ; mantiene la capa caliente a 60°
;M104 S200 ; mantiene el extrusor a 200° para que no se enfrie
;G1 X10 Y10 Z10 ; mueve el extrusor a una esquina para cambiar de filamento
;G1 E-60 ; retrae el filamento 60mm para cambiarlo
;M300 S440 P200 ; pitido de aviso
Se utiliza solo la parte roja.
Alguien puede indicarme en donde radica mi error?
Muchas gracias.