About This File
Last special order. 3d sculpting and 3d printing of goat horns in polypropylene. I chose this material because it's robust and lightweight. With only a 1.8mm shell, I have a weight of about 60gr for a single horn. A led system will illuminate the symbols.
Print settings :
Printer -> UM2 + Bloc Olsson + Bondtech
Nozzle -> 0.6mm
Material -> Centaur PP (polypropylene)
Layerheight -> 200µm
Shell -> 3 (1.8mm) + Top/Bottom 9 lignes (1.8mm)
Infill -> 0%
Temperature -> Nozzle 235° / Bed 30°
Fan Speed -> 100%
Speed -> 40mm/s and the 1st layer at 30mm/s
Adhesion -> scotch
Slicer -> Cura 3.6
Supports -> 45° with 15% of density. I also activate the Support Interface
I also did a Timelapse of the Sculpting done with ZBrush -> https://youtu.be/dFdMDAD5Z4g