3D Print posted by lekid
Creation of a small box for a bed remote.
Printed in Centaur PP from Formfutura.
Printer : UM2 + bondtech feeder + Olsson Bloc
Material : Centaur PP (polypropylène) de Formfutura
Nozzle : 0.6mm
Layer Height : 300microns
Speed : 40mm/s
Wall : 2mm
Supports : Everywhere at 50° and 20%
Fan Speed : 100%
Printing Time : 3h10
I used brown PP scotch for the bed adhesion.
the sun is finally back, and i sculpted asian style clouds (I miss clouds ^^)
Print settings :
Machine : UM2, bondtech feeder, Olsson bloc
Nozzle : 1mm
Walls : 3
Layerheight : 200µm
Infill : 0%
Speed : 45mm/s
Fan speed : 100%
Temperature : 200° / 60°
Bed adhesion : Supports + Brim
Filament used : Colorfabb / Formfutura / SOVB3D / Biofila by Two Bears
You can find the clouds stl here --> https://cults3d.com/en/users/LeKid/creations
Here is a small cloud I sculpted inside ZBrush last week ;)
some informations about the print :
Printer : UM2 + Olsson Block + Bondtech Feeder
Nozzle : 0.6mm
LayerHeight : 200µm
Wall : 3 (1.8mm)
Top/Bottom : 6 layers (1.2mm)
Infill : 15%
Temp : Nozzle -> 200° / Bed -> 60°
Speed : 55mm/s (1st layer at 35mm/s)
Printed with the tip in the air
Supports : 50° / 15% in density
Total printing : almost 1h
Concerning the sanding process, I started with a grain at 180 and then after 400 to finish at 600 (personally I do not go down in grain it's already quite smooth in 600 :)
I also made a Time Lapse of the sculpting
Long time I didn't do some organic modeling.
I'm a fan of Ghibli so I decided to do a Fan print of the Kashira from Spirited Away.
Know it's time to improve organic skills and time optimization
Sculpted in ZBrush 4r8
Silk filament from Biofila by TwoBears
*Fan Art + 3d Print Mode*
Creation of Asuma Sarutobi's Chakra Blades with support.
Modelling with Zbrush 4 R8 of Pixologic.
Blades printed in PlaTec and Support with Easywood Birch from Formfutura.
No more masking tape, painting of blades with tamiya Gun Metal and Chrome Silver with brush.
Réalisation d'une PokeWood pour les 20ans de Pokemon.
Modélisation sous ZBrush et Impresion 3d sur UM2 avec Feeder Bondtech et Bloc Olssen.
Utilisation des filaments wood de Formfutura Cèdre / Ebène / Pin / Bouleau et Olive.
Realisation of a PokeWood for the 20 years of Pokemon.
Modeling with ZBrush and 3d Print on UM2 with Bondtech's Feeder and Olssen Bloc.
Easywood filaments of Formfutura Cedar / Ebony / Pin / Birch and Olive.
I present you the mascot I modeled for the upcoming B-Velta, a delta type 3d printer made in France.
The gcode of the mascot will be inside the futur printer
Modeling in ZBrush.
2 versions of the model :
Colorfabb Ngen Silver Metallic and Octofiber Light Wood
Total Height : 180mm
Nozzle -> 0.6
Wall -> 1.2
Infill -> 20%
B-Velta -> https://www.facebook.com/BVELTA
My facebook page -> https://www.facebook.com/KevinPalluet.MIP
3d modeling of a One Tier Pagoda for a Lantern project with ZBrush 4r7.
- Primer : MrSurfacer 1000 (airbrush)
- Tamiya Black Semi Gloss (airbrush)
- Tamiya Copper (airbrush)
- Pébéo Studio Acrylics HV iridescent precious gold (hand painted)
- Varnish Tamiya Clear (airbrush)
FR : Mon frère s'étant mis au cosplay et faisant le Balance Breaker d'Issei Hyodo (High School DxD), il lui manquait la lame de l'épée Ascalon. Je lui ai donc modélisé, imprimé puis apprêté. La peinture sera finalisé par lui même. La lame fait quasiment 1m
Lien de sa page facebook --> Hizu Cosplay <--- Link of his Facebook page
EN : My brother began doing cosplay and did Issei Hyodo's Balance Breaker (High School DxD), he missed the blade of the sword Ascalon. So I modeled, printed and primed it. The painting will be finalized by himself. The blade is almost 1m
The title speaks of himself
I wish a merry christmas to all of you!!
PLA Formfutura Gold
I am happy to present you a personalized teddy that I realized from A to Z and printed in ngen
Modeled in ZBrush and printed with UM2 with Colorfabb ngen Blue.
The teddy is in one only piece!! 72h of 3d print just for the teddy ^_^
Lenght -> 150mm / Width -> 130mm / Height -> 180mm
If you want to see more, I made an album with some pictures from WIP to Shooting here -> https://www.facebook.com/KevinPalluet.MIP/photos/?tab=album&album_id=1052153738243735
Here an other 3d print of the Train.
Now it's with Easywood cedar, pine and birch from Formfutura
The problem when we buying objects is that it still lacks something.
The original pieces was not suitable due to the external insulation of the house.
So I enlarged the pieces and producing a small series.
I installed the feeder of Bondtech and I put 2 times less than expected.
Printed with PlaTec from Biofila by Two Bears
Work done for the Club Alpha - Maquettiste / Modelisme.
I reproduce their mascot present on their logo in 3d with ZBrush and 3d printed with UM2.
Head,Hair and Hand : 0.15mm nozzle
Bust : 1mm nozzle
Arms and Legs : 0.6mm nozzle
For the wedding of a friend, I had the honor to print her small 6 pins.
The design is basically a custom stamp for their wedding by Mydearpaper and modeling of an other friend.
I used a 0.15mm diameter nozzle.
A layer of golden bomb was sprayed over by him.
3d printing done for the daughter of a Rugbyman friend.
Done in 4 parts with Colorfabb ngen and FormFutura HDGlass.
Now, I know that I have to improve my paint skills with the airbrush
Here is a Train I made for a Birth Gift.
78 pieces were printed.
Here the filaments I used:
Formfutura - 3D printer filaments EasyWooD Coconut ( 7pièces ) , Olive ( 8 pieces) , Ebony ( 49 pieces ) and Colorfabb ngen Silver Metallic ( 14 pieces).
Modeling with Pixologic ZBrush 4R7 and the ZModeler
Slicing with Cura
Ultimaker UM2 + Olssen Block
EasyWooD : 1mm nozzle , layer height 0.1mm , speed 30mm/s Filling 100 %
Ngen : Nozzle 0.4mm , 0.1mm layer height , speed 40mm/s , filling 100%