-richard-
-
Posts
3 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by -richard-
-
-
Hi! I just bought an Ulticontroller and i'm curious if it is possible to pause a print with it. I used to use the pause functionality in pronterface, but I can't find anything in the Ulticontroller menu.
The reason i'm asking is that I have very large prints (+15 hours) I would like to pause the print when i leave the office at night and resume it when I get back in the morning. Is something like this possible with the UltiController?
kind regards,
Richard
-
Hi all!
I'm looking to buy a 3d printer and after some research i'm leaning towards the Ultimaker. I have some remaining questions; I would like to print abstract information, for example; a graph. I would like to add text to it, so for example I would like to print a cube, and on top of this cube I want to print "Cube 1". It would improve readability if I could do this in another color than the cube itself. Is it possible to print for example a green cube, change material and then print a text on top of it in a different color? I imagine the second print job that prints the text would then have to know at what z height to start...
I saw the makerbot replicator has dual extrusion functionality, so I imagine this would be possible with it. However i'm really impressed by the quality of the Ultimaker and it's output and i like the DIY mentality of it. Given my goals of printing text in a different color on top of something, would the Ultimaker still be a good choice?
Somebody told me that it is possible to add an extra head to the Utimaker, has anyone ever done that? Does it make sense? I haven't seen any kits for a separate head and I imagine constructing one myself is perhaps too ambitious.
Any thoughts?
thanks!
Richard
resuming g-code
in UltiMaker Cura
Posted
Hi, I have a large print that I want to pause because I don't want to leave my printer running unattended.
It stopped at layer 100. Now I would like to resume it at this layer the next time. I was thinking of just deleting the first 100 layers from the g-code and running the rest, is this possible?
The first commands at layer 100 look like this:
;LAYER:100
;TYPE:WALL-OUTER
G1 X73.206 Y124.307 Z20.2 F9000.0
G1 X20.861 Y23.532
G1 X20.069 Y20.68
will this instruct the printer to start at Z position 20.2, without "homing" first?
Also, should I change anything to the g-code start section?
I
;TYPE:CUSTOM
M92 E865.888000
;Sliced file.stl at: Fri 20 Jul 2012 16:05:02
;Basic settings: Layer height: 0.2 Walls: 0.8 Fill: 20
;Print time: 41:22
;Filament used: 81.13m 691.87g
;Filament cost: Unknown
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
G1 Z15.0 F180
G92 E0 ;zero the extruded length
G1 F200 E3
G92 E0 ;zero the extruded length again
;G1 X100 Y100 F9000
G1 F9000
thanks!
Richard