I also read this statement regarding the Ultimaker: "the company says printing with the plant-based PLA makes for a faster and more stable build." Okay, I understand faster and the lack of a heated factory-supplied bed, but what does "more stable" mean? Is it referring to the warping of ABS without a heated bed?
I'm interested in the Ultimaker for its precision and resolution but I need to print ABS for strength. I have no doubt that I can design, build, and add a heated bed. I've also read that putting a very thin layer of ABS cement on the bed can sometimes keep the ABS stuck down. This requires a glass bed, but might be worth a try. I expect to print very slowly for the best finish possible. Is there any reason I should avoid the Ultimaker?
I will also need to use the full 210mm build dimensions in x and y. Will the Ultimaker actually print to the spec dimensions with ABS? I"m not at all constrained in z in order to produce my intended application (~1" thick, low volume parts for a commercial device) so there'll be no problem in using a small amount of all that Ultimaker z-height for a good heated bed!
Thanks for any answers or responses,
-Cal
