Jump to content

foehnsturm

Ambassador
  • Posts

    1,821
  • Joined

  • Last visited

  • Days Won

    63

3D Print posted by foehnsturm

  1. LED Lampshades

    I got tired of the old 3D printed lampshades for our self-built LED lighting. So I designed new ones with Ebony woodfill and blue.
    Dual extrusion print, two parts: bottom (spiralize mode) and top (wood and blue) with a slit to get the cable through. The woodfill seems to have some air in it, tiny holes and crackling sound during printing.
    UPDATE: I played around with extrusion rate and decided to consider the tiny holes as a feature now

    1,525 downloads

       (0 reviews)

    0 comments

    Updated

  2. Open RC wheel

    Test print while finishing the magnetic tool changer beta for public release.
    Printed with Olsson ruby for the PLA and a coated nozzle prototype from 3DSolex for the FlexiFil (shore 45D).

    1,078 downloads

       (0 reviews)

    0 comments

    Updated

  3. Spiderman

    Test print while finishing the magnetic tool changer beta for public release.
    Printed with Olsson ruby for the PLA and a coated nozzle prototype from 3DSolex for the PVA.
    Original model scaled to 50%.

    910 downloads

       (0 reviews)

    0 comments

    Updated

  4. Toothbrush - using dual extrusion for what could be an overmolding prototype

    HD-Glass (PETG) & Flexifil (flexible TPC), magnetic tool changer and some new type of nozzle cover to avoid dragging around carbonized PET junk which tends to stick to the nozzle.
    Well, without bristles - this would require a 3rd extruder

    1,475 downloads

       (0 reviews)

    0 comments

    Updated

  5. Integrated flexible finger

    CPE and Formfutura Flexifil. I used the Cura CPE defaults for Flexifil, just lowered speed and  reduced retraction.

    1,230 downloads

       (0 reviews)

    0 comments

    Updated

  6. Example for prototyping real stuff with dual extrusion and PLA / PVA

    Printed as a single part with PLA and PVA support.
    Sliced with Cura 2.3
    Printed on the UM2 tool changer, UM3 print will follow

    2,259 downloads

       (0 reviews)

    0 comments

    Updated

  7. (Another) vertebrae - magnetic tool changer - HD Glass & Recreus Filaflex

    Printed with the magnetic tool changer, 0.4 nozzle for HD Glass, 0.6 race nozzle & Machtless block for Filaflex.
    Scaled down a little to print a longer section.
    Don't be afraid, I won't print an entire spine

    1,313 downloads

       (0 reviews)

    0 comments

    Updated

  8. Light pipe experiment

    Dual extrusion, HD glass (0.8 mm nozzle, 0.6 mm layer) and PLA (0.4 mm nozzle, 0.2 mm layer).
    For design and slicing (except the dual extrusion part) I followed the tutorial for Taulmann t-glase.
    5 € LED bike lamp used as light source.

    2,114 downloads

       (0 reviews)

    1 comment

    Updated

  9. How small can we go?

    Benchy, scaled down to 50%, UM2+ with magnetic tool changer, no post processing

    1,611 downloads

       (0 reviews)

    0 comments

    Updated

  10. Vertebrae - magnetic tool changer - HD Glass & Recreus Filaflex

    Like most people I found Filaflex very hard to print - until now
    Printed with the magnetic tool changer, 0.4 nozzle for HD Glass, 0.6 race nozzle & Machtless block for Filaflex

    1,668 downloads

       (0 reviews)

    0 comments

    Updated

  11. Dual extrusion Aria by Louise Diggers, printed with two different materials

    Heavily modified UM original with custom printhead changer, 2 printheads:
    WoodFill @ 190°C, 0.6 mm nozzle,
    transparent PLA @ 205°C, 0.4 mm nozzle,
    no post-processing :-)

    2,169 downloads

       (0 reviews)

    0 comments

    Updated

  12. Finally, Dual Draudi left the BCN3D habitat

    Ultimaker with tool changer.
    Scaled down to 60%, (makes printing harder but I didn't have enough golden filament left ...)

    1,606 downloads

       (0 reviews)

    0 comments

    Updated

  13. Dual extrusion menagerie

    Dual extrusion menagerie

    2,737 downloads

       (0 reviews)

    0 comments

    Updated

×
×
  • Create New...