tomato-icn
-
Posts
26 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by tomato-icn
-
-
Dear Daid, yeah I know you're sick and tired of various feature requests,
but I must ask please =
as Cura is the best 3d printing software at the moment,
will you ever plan to implement STL EXPORT feature,
I mean when model is scaled, rotated, supports generated, etc - so it will be possible to save this work as a new STL file, not just GCODE.
Thank you so much in advance,
-
Dear community, what can cause this?
Checked the wires and reconnected them carefully on PCB, and on small pcb again on hotend. This causing different color layers (darker and lighter).
I set to 210, and it jumps from 205 to 215 :(
Thank you!
-
Dear Daid, and community,
current CURA 13.06.4 - is there any way to use JORIS as a plugin, in plugins section, I want it badly.
If yes, please hand me a link to the file.
Thanks in advance,
-
I still got the same problem on my both notebooks samsung and HP.
I gave up didn't find the solution. sometimes it hangs the print - but pretty rare.
-
thanks a lot for quick respond!
so the big brass nut should slide a little, please explain this moment, thank you!
I suspect also the problem is in big brass nut.
-
Dear community, I've been fighting with this issue for a several days and I'm almost desperate:
the problem is - my print started to have strange repeating lines.
What I've done:
carefully checked the X-Y axes - both are orthogonal, not bent, belts are tight, long and short ones (they are all tight and nice) - moreover while filling the surface I can see everything's alright, I even tried belt tensioneer - but they only reduce quality, so I don't use them.
I also saw the wobbling Z-axis problem, so I reassembled and assembled Z-axis again, still no luck (checked the couplings and brass nut).
Any ideas please?
My prints now:
My prints were:
-
+1. Confirm this too.
I still get the same ERRORS about LINES.
echo:Unknown command: "
Error:Line Number is not Last Line Number+1, Last Line: 3
echo:Active Extruder: 0
Error:Line Number is not Last Line Number+1, Last Line: 3
Error:Line Number is not Last Line Number+1, Last Line: 5
Error:checksum mismatch, Last Line: 27
Error:No Line Number with checksum, Last Line: 27
Error:checksum mismatch, Last Line: 260
Error:Line Number is not Last Line Number+1, Last Line: 260
Error:No Checksum with line number, Last Line: 470
Error:Line Number is not Last Line Number+1, Last Line: 470
Error:No Line Number with checksum, Last Line: 470
Error:checksum mismatch, Last Line: 855
Error:No Line Number with checksum, Last Line: 855
Error:checksum mismatch, Last Line: 931
Error:Line Number is not Last Line Number+1, Last Line: 931
Error:checksum mismatch, Last Line: 1067
Error:checksum mismatch, Last Line: 1171
Error:Line Number is not Last Line Number+1, Last Line: 1171
Error:checksum mismatch, Last Line: 1233
Error:Line Number is not Last Line Number+1, Last Line: 1233
Error:checksum mismatch, Last Line: 1361
Error:checksum mismatch, Last Line: 1577
Error:Line Number is not Last Line Number+1, Last Line: 1577
Error:checksum mismatch, Last Line: 2409
Error:Line Number is not Last Line Number+1, Last Line: 2409
Error:No Line Number with checksum, Last Line: 2409
Error:checksum mismatch, Last Line: 2636
Error:Line Number is not Last Line Number+1, Last Line: 2636
Error:checksum mismatch, Last Line: 2824
Error:Line Number is not Last Line Number+1, Last Line: 2824
Error:checksum mismatch, Last Line: 3128
Error:Line Number is not Last Line Number+1, Last Line: 3128
Error:checksum mismatch, Last Line: 3653
Error:No Line Number with checksum, Last Line: 3653
Error:checksum mismatch, Last Line: 4601
Error:Line Number is not Last Line Number+1, Last Line: 4601
Error:checksum mismatch, Last Line: 4946
Error:No Line Number with checksum, Last Line: 4946
Error:checksum mismatch, Last Line: 5641
Error:Line Number is not Last Line Number+1, Last Line: 5641
Error:checksum mismatch, Last Line: 6549
Error:Line Number is not Last Line Number+1, Last Line: 6549
Error:checksum mismatch, Last Line: 6927
Error:No Line Number with checksum, Last Line: 6927
Error:checksum mismatch, Last Line: 7618
Error:No Line Number with checksum, Last Line: 7618
Error:checksum mismatch, Last Line: 8577
Error:checksum mismatch, Last Line: 9026
Error:Line Number is not Last Line Number+1, Last Line: 9026
Error:checksum mismatch, Last Line: 10189
Error:No Line Number with checksum, Last Line: 10189
Error:checksum mismatch, Last Line: 10682
Error:Line Number is not Last Line Number+1, Last Line: 1
All the time, sometimes my print finishes well, and sometimes IT STOPS in the middle with HOTEND melting my print, too sad, so sad. RESUME <--> PAUSE helps a little and hotends starts to move a little bit, but hardly finishes another layer and stops again, so the print is ruined again.
Anyone? Thanks a lot.
-
thanks a lot for good advice my friend.
-
HP 625 notebook here, WIN7, not very powerful, but works pretty good,
I don't have an Ulticontroller unfortunately.
-
very clever update, thanks for that, that was a pain sometimes.
can you please comment on any possibility of item name poping up somewhere upon focusing on item or something like this,
would be really useful in case of sevaral parts loaded.
Thank you, Daid.
We truly appreciate your hard work.
Regards,
-
Dear community, Cura 13.06.3
All the time I print, I take a look at the TERM tab,
and there are many lines like this:
Error:Line Number is not Last Line Number+1, Last Line: 65110
Error:checksum mismatch, Last Line: 66064
Error:Line Number is not Last Line Number+1, Last Line: 66064
Error:Line Number is not Last Line Number+1, Last Line: 66065
Error:checksum mismatch, Last Line: 66917
Error:Line Number is not Last Line Number+1, Last Line: 66917
Error:No Line Number with checksum, Last Line: 66917
Error:checksum mismatch, Last Line: 67742
Error:Line Number is not Last Line Number+1, Last Line: 67742
Error:Line Number is not Last Line Number+1, Last Line: 67743
Error:Line Number is not Last Line Number+1, Last Line: 67744
Error:No Line Number with checksum, Last Line: 67744
Error:checksum mismatch, Last Line: 68570
Error:Line Number is not Last Line Number+1, Last Line: 68570
Error:checksum mismatch, Last Line: 69358
Error:Line Number is not Last Line Number+1, Last Line: 69358
Error:No Line Number with checksum, Last Line: 69358
Error:checksum mismatch, Last Line: 70182
Error:Line Number is not Last Line Number+1, Last Line: 70182
Error:Line Number is not Last Line Number+1, Last Line: 70183
Error:checksum mismatch, Last Line: 70977
Error:Line Number is not Last Line Number+1, Last Line: 70977
Error:No Line Number with checksum, Last Line: 70977
Error:checksum mismatch, Last Line: 71761
Error:Line Number is not Last Line Number+1, Last Line: 71761
Error:No Line Number with checksum, Last Line: 71761
Error:checksum mismatch, Last Line: 72581
Error:Line Number is not Last Line Number+1, Last Line: 72581
Error:Line Number is not Last Line Number+1, Last Line: 72582
Error:checksum mismatch, Last Line: 73410
Error:No Line Number with checksum, Last Line: 73410
Error:checksum mismatch, Last Line: 74277
Error:No Line Number with checksum, Last Line: 74277
Error:checksum mismatch, Last Line: 74823
Error:No Line Number with checksum, Last Line: 74823
Error:checksum mismatch, Last Line: 75695
Error:Line Number is not Last Line Number+1, Last Line: 75695
Error:Line Number is not Last Line Number+1, Last Line: 75695
Error:Line Number is not Last Line Number+1, Last Line: 75696
Error:Line Number is not Last Line Number+1, Last Line: 75696
Error:Line Number is not Last Line Number+1, Last Line: 75697
Error:checksum mismatch, Last Line: 76558
Error:Line Number is not Last Line Number+1, Last Line: 76558
Error:Line Number is not Last Line Number+1, Last Line: 76559
Error:checksum mismatch, Last Line: 77484
Error:Line Number is not Last Line Number+1, Last Line: 77484
Error:No Line Number with checksum, Last Line: 77484
Error:checksum mismatch, Last Line: 78397
Error:Line Number is not Last Line Number+1, Last Line: 78397
Error:checksum mismatch, Last Line: 79239
Error:Line Number is not Last Line Number+1, Last Line: 79239
Error:Line Number is not Last Line Number+1, Last Line: 79240
Usually the print finishes alright, no problems.
but sometime IT'S STUCK somewhere in the middle stating the ERROR about LINES.
Any ideas please?
-
YES, CONFIRMED! Already removed my cam software and disabled it in Device Managed,
Daid, please comment, is that a bug?
-
Update, now the same happens to me when I printed multiple objects.
Upon lifting up Z axis for next object in queue, the first layer of the new object was print at 60 mm/sec, definititely not 20 mm/sec.
thanks
-
Please check this:
1) set cutoff object bottom any value - I set 14 mm
2) bottom layer speed is set to 20 by default
3) print speed was 60 for me
When I started PRINT, Cura ignore 20 setting and printed 1st layer of cut object with 60 speed. I think it's a bug, 1st layer is the one that touched the platform first, correct? Should be 20 mm speed.
Thank you. Hope this will be corrected.
Thanks!
-
+1 agreed
-
For me the supershaper is absolutely useless.
Agree here:
1) PREPARE BUTTON is better, don't like autoslicing, or at least this option can be added into EXTRAS (AUTOSLICE ON LOAD ON | OFF)
2) ITEM TITLE on click would be awesome
3) JORIS - please come back
4) SKIN option, loved it too
-
One more thing please: for me it's pretty vital to have the name of each part loaded on the printing area, sometimes there are 2,5, or even 7 pieces, and it would be AWESOME to have their filenames poped up somewhere on CLICK.
Is that possible please?
I remember in prev Cura releases it was shown it the window title.
Thank you, Daid.
-
yep, correct, pretty hard, or for example to highlight the points of crossing with printing area top layer?
Would be awesome. Thank you.
By the way, thanks for 16.03 and congrats with the GREAT release.
-
I might be wrong, but it's a bit "drowning" to me, can't see for sure the horizon.
-
One more request please - it it possible to make some kind of grid on the build platform, or ENABLE GRID option, to clearly see if the object lays flat on it, would be really useful I think, it's not always clearly visible if it lays flat or there's a small angle.
Thank you!
-
Dear Daid, my 5 cents here:
1) is that possible to set a temperature per layer, or something like this,
for 1st layer a little bit higher, for middle print - average, and for top and narrow places a bit lower to prevent melting.
That would be awesome.
Thank you.
-
problem solved.
-
no, it's not about filament at all - the reason is that I want to fill the object with gypsum, to make them weight more. that's the idea.
any solutions, please?
-
thanks a bunch for instant replies guys,
but what would be the solution to your mind, any ideas please?
thanks!
Cura feature I dream about
in UltiMaker Cura
Posted
thanks a lot, just tried - as far as I can see it only exports the following parameters in STL
size, orientation.
Shell thickness - no? Any solutions please?
Thanks in advance!