Jump to content

andrea

Dormant
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by andrea

    0.2 and 0.1 mm nozzles extrusion

    in UltiMaker 3D printers

    Posted

    Hi everybody,

    I am opening this post because I am facing quite a lot of difficulties in the use of an 0.2 mm nozzle in my ultimaker original.

    I tried to print with a 2.85 mm filament and also with a 1.75 mm filament, at different temperatures, speeds and infill %. I didn't get any good result, most of the time the material was simply clogging inside.

    Is there someone who has been able to print with a 0.2 or even a 0.1 nozzle?

    Thanks,

    Andrea

     

    How to print at low temperature

    in UltiMaker 3D printers

    Posted

    Hello,

    I have recently made some modification to my printer and I would like to print at really low temperature (40-60 degree).

    Unfortunately even if I set up the printing temperature in Cura at 40 degree the printer do not move cause I get an error that the nozzle is still not hot enough.

    Someone know how to solve it?

    Cheers,

    Andrea

     

    How to change starting position?

    in UltiMaker 3D printers

    Posted

    Dear all,

    I am trying to change the startingf position of the nozzle from the left from corner to the centre of the building plate. This because i made some modification to the printing head and now is more large than normal, so it crash on the corner before reach the end stops.

    anyone know how to modify this setting?

    many thanks :mrgreen:

     

    Cambiare posizione di partenza

    in Italiano

    Posted

    Ciao a tutti,

    ho un piccolo problema con la mia ultimaker. Ho apportato alcune modifiche e quindi ora l'head risulta essere piu' ingombrante; il che significa che quando deve stampare non puo' piu partire dall'angolo frontale sinistro perche' andrebbe a toccare i bordi. Vorrei farla partire dal centro ma anche spuntando l'opzione "setta il centro di stampa a 0,0) non ho ottenuto risultati.

    Qualcuno sa come risolvere?

    grazie mille

     

    Problema stampa Ultimaker Original

    in Italiano

    Posted

    Non so se abbiamo avuto lo stesso problema, a me dopo un paio di layer si spostava di un paio di centimetri e continuava a stampare, come se il progetto fosse shiftato.

    Ho risolto stringendo le pulegge, rifacendo il modello (alcune volte quando fai il modello stl un layer viene saltato o non riconosciuto e li si sfasa) e stampando avendo aperto solo cura e non altri software di modellazione (in questo ultimo caso o si blocca o si sposta), non penso sia dovuto alla capacita' computazionale del computer ma piu' ad una qualche incompatibilita'.

     

    0.2 mm nozzle best settings

    in Improve your 3D prints

    Posted

    Hi everybody,

    I recently tried to change the nozzle of my ultimaker with a 0.2 mm.

    However I have some difficulties in find the best settings (temperature, speed and bed distance) to perform some prints. usually the nozzle get locks after a while during the printing due to the material stuck inside.

     

    Did anyone try something similar?

     

    FYI I have an ultimaker original without heated bed.

     

    thanks :D

     

    Problema heater

    in Italiano

    Posted

    Mi da l'errore quando Cura prova a connettersi. Se provo a rimuovere il sensore dal blocco con il nozzle allora si connette, appena il sensore tocca compare il messaggio e si blocca tutto. Inoltre quando si blocca segna una temperatura di 380 C.

     

    Extruder switched off. MAXTEMP triggered

    in UltiMaker 3D printers

    Posted

    This the log of the error..

    I tried everything and it keep not working. any suggestion?

    Recv: ok T:58.3 /0.0 B:0.0 /0.0 T0:58.3 /0.0 @:0 B@:0

    Baudrate test ok: 7

    Send: M105

    Recv: ok T:58.3 /0.0 B:0.0 /0.0 T0:58.3 /0.0 @:0 B@:0

    Baudrate test ok: 8

    Send: M105

    Recv: ok T:58.3 /0.0 B:0.0 /0.0 T0:58.3 /0.0 @:0 B@:0

    Baudrate test ok: 9

    Send: M105

    Recv: ok T:58.3 /0.0 B:0.0 /0.0 T0:58.3 /0.0 @:0 B@:0

    Send: M999

    Changing monitoring state from 'Detecting baudrate' to 'Operational'

    Recv: Resend: 1

    Recv: ok

    Recv: ok

    Send: M105 T0

    Recv: echo:Unknown command: "

    Recv: ok

    Send: M105 T0

    Recv: ok T:29.8 /0.0 B:0.0 /0.0 T0:29.8 /0.0 @:0 B@:0

    Send: M105 T0

    Recv: ok T:29.8 /0.0 B:0.0 /0.0 T0:29.8 /0.0 @:0 B@:0

    Send: M105 T0

    Recv: ok T:30.2 /0.0 B:0.0 /0.0 T0:30.2 /0.0 @:0 B@:0

    Send: M105 T0

    Recv: ok T:30.3 /0.0 B:0.0 /0.0 T0:30.3 /0.0 @:0 B@:0

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Changing monitoring state from 'Operational' to 'Error: 0: Extruder switched off. MAXTEMP t...'

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

     

    Problema heater

    in Italiano

    Posted

    Il punto e' che il sensore di temperatura funziona, e' la termocoppia che non scalda. Quindi sto meditando che il problema possa essere o nella scheda arduino o nell'alimentatore.

    queto e' l'error log che ottengo:

    Changing monitoring state from 'Offline' to 'Detecting serial port'

    Connecting to: COM5 (programmer)

    Connected to: Serial<id=0x581bf50, open=True>(port='COM5', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor

    Changing monitoring state from 'Detecting serial port' to 'Detecting baudrate'

    Recv: ?Np|$n@N???

    Recv: H?J1+gJPOn6?Hg?H?X?K

    Recv: ~|9L6

    ?F^?H?H?x?

    Recv: 3?~?K)?=?M?7??%I?

    Recv: &?}Ckmbo7d6?p|??HsH6?J?JL?K?L?K?????Z?

    Recv: ':fH/^7l

    Recv:

    Recv: gJ?Z??I??I??J?z?X?:&?+^^h?$p|4?%?%?%H%?x??+^>J??^IJONX?^X?J?j?KHJ?aHJP<@_a?fF??$MMvL

    Recv: $

    kJ?6l* ?X/+h>??f('?H

    Recv: I?&(^l

    Recv: I?f8n^l

    Recv: x?

    Recv: ?Zb?Jj?J?J?(jK??

    Recv: '*?-ah$p|

    Recv: ?I?j?IF?

    Recv: jo?f?

    Recv: H??J???5?(-?*?N?8O=?6?+N-/h?^fNN^??>Cx?^H&NN6a?-hH& @>a>?H7ob6HAw&6??C(N??nP<n6@???

    Trying baudrate: 250000

    Send: M105

    Recv: H?Jq'

    Recv: pON6?H'?H?X?k

    Recv: O>|yLvM?>[????? Dec 16 2013

    Recv: echo: FrYj?????? 4036 PlannerBufferBytes: ???Recho:Har?????Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Changing monitoring state from 'Detecting baudrate' to 'Error: 0: Extruder switched off. MAXTEMP t...'

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

    Recv: echo:SD init fail

    Recv: echo:Unknown command: ""

    Recv: ok

    Recv: ok T:0.0 /0.0 B:0.0 /0.0 T0:0.0 /0.0 @:0 B@:0

    Recv: start

    Recv: echo:Marlin Ultimaker: 13.12 (250000_single)

    Recv: echo: Last Updated: Dec 16 2013 15:34:02 | Author: (David Braam)

    Recv: Compiled: Dec 16 2013

    Recv: echo: Free Memory: 4036 PlannerBufferBytes: 1232

    Recv: echo:Hardcoded Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

    Recv: echo:SD init fail

    Recv: start

    Recv: echo:Marlin Ultimaker: 13.12 (250000_single)

    Recv: echo: Last Updated: Dec 16 2013 15:34:02 | Author: (David Braam)

    Recv: Compiled: Dec 16 2013

    Recv: echo: Free Memory: 4036 PlannerBufferBytes: 1232

    Recv: echo:Hardcoded Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

    Recv: echo:SD init fail

    Recv: start

    Recv: echo:Marlin Ultimaker: 13.12 (250000_single)

    Recv: echo: Last Updated: Dec 16 2013 15:34:02 | Author: (David Braam)

    Recv: Compiled: Dec 16 2013

    Recv: echo: Free Memory: 4036 PlannerBufferBytes: 1232

    Recv: echo:Hardcoded Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

    Recv: echo:SD init fail

    Recv: start

    Recv: echo:Marlin Ultimaker: 13.12 (250000_single)

    Recv: echo: Last Updated: Dec 16 2013 15:34:02 | Author: (David Braam)

    Recv: Compiled: Dec 16 2013

    Recv: echo: Free Memory: 4036 PlannerBufferBytes: 1232

    Recv: echo:Hardcoded Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

    Recv: echo:SD init fail

    Recv: start

    Recv: echo:Marlin Ultimaker: 13.12 (250000_single)

    Recv: echo: Last Updated: Dec 16 2013 15:34:02 | Author: (David Braam)

    Recv: Compiled: Dec 16 2013

    Recv: echo: Free Memory: 4036 PlannerBufferBytes: 1232

    Recv: echo:Hardcoded Default Settings Loaded

    Recv: echo:Steps per unit:

    Recv: echo: M92 X78.74 Y78.74 Z533.33 E836.00

    Recv: echo:Maximum feedrates (mm/s):

    Recv: echo: M203 X500.00 Y500.00 Z5.00 E25.00

    Recv: echo:Maximum Acceleration (mm/s2):

    Recv: echo: M201 X9000 Y9000 Z100 E10000

    Recv: echo:Acceleration: S=acceleration, T=retract acceleration

    Recv: echo: M204 S4000.00 T3000.00

    Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

    Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

    Recv: echo:Home offset (mm):

    Recv: echo: M206 X0.00 Y0.00 Z0.00

    Recv: echo:PID settings:

    Recv: echo: M301 P22.20 I1.08 D114.00

    Recv: Error:0

    Recv: : Extruder switched off. MAXTEMP triggered !

    Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

     

    Problema heater

    in Italiano

    Posted

    Ciao a tutti,

    Apro questo topic perche' ho un problema che non riesco a risolvere. Ho una ultimaker original. Quando provo a stampare qualcosa riesco a muovere i motori fino a quando non setto la temperatura, a quel punto l'intera macchina si blocca.

    All'inizio supponevo fosse un problema della sonda ma se la tengo in mano vedo che legge la temperatura corporea. Ho invece trovato che il problema e' l'heater il quale sostanzialmente non scalda.

    Quando avvio il "first run wizard" allo step di controllo della temperatura si accende il led rosso sulla scheda ma si spegne poco dopo e l'heater non si scalda affatto.

    Ora la mia domanda e', si tratta di un problerma dell'heater che va sostituito o di un problema della scheda arduino?

    quando provo a inserire l'heater nel support con il nozzle ottengo un errore che dice che la max temp triggered.

    Qualcuno ha dei suggerimenti? Oramai non so piu' che fare, questa stampante ha sempre un problema dietro l'altro,

    grazie

     

    Problema step motors

    in Italiano

    Posted

    Ciao a tutti,

    Apro questo topic per chiedere aiuto con un problema che non riesco a risolvere.

    Possiedo una UM1, dopo le prime stampe ho notato che quando vi sono molti layer questi shiftano leggermente fino a formare un pezzo inclinato. Cercando di risolvere il problema ho notato che durante il bed leveling, quando la stampante dovrebbe stampare un quadrato in verita' stampa qualcosa di diverso. Mi spiego meglio, si muove correttamente al primo e al secondo angolo, poi quando deve andare al terzo si sposta piu in basso e rientra e fa lo stesso con l'ultimo angolo. Ottengo quindi una sorta di trapezio. Leggendo in giro ho letto che potrebbe essere un problema dei driver degli step motors ma non sono sicuro.

    Qualcuno ha dei suggerimenti?

    Grazie mille

    Andrea

     

    UM1 Shipping Schedule?

    in Buying or selling your UltiMaker

    Posted

    I called the service line on monday, they informed me that my UM1 Kit should be sent at the end of may. 2-4 weeks instead of 1-3 days as stated in the email !

    The long waiting times don't sound very encouraging.. :-|

     

    Welcome in the group, it's 10 weeks I'm waiting (almost 3 months) and still no sign of my order. Be ready to a long wait.

    Andrea

     

    UTM 1 kit - R384821534 69 days wait and counting

    in Buying or selling your UltiMaker

    Posted

    Hi Andrea,

    Sorry to hear that it takes so long. I was also an unfortunate one where the delivery took a little more then 11 weeks for the UM original kit. The only thing that I can recommend is to call and explain what is happening. I know from my own experience that it is a tough call to hang in limbo land. There seems to be no reliable method to get a correct delivery date. It drives you nuts when you hear delivery in 2 or 3 days and it does not happen (it happened to me 2 times the 3 time it got delivered). I hope you soon get relief by getting the shipment email.

     

    Hi Zoev89,

    I have already called 5 times, and sent at least 10 e-mails. So you probably can understand how I feel. Moreover this printer it's necessary for work so they are also damaging my work timetable.

     

    UM1 Shipping Schedule?

    in Buying or selling your UltiMaker

    Posted

    Hello,

     

    I have bought an UM1 (R384821534) the 13th of March. After a couple of weeks i sent a mail asking news about my order(because in a first conversation with your support service they told me that the non-assembled model would have been dispatched in two weeks) and the answer was that I would have received my order the 16th week of the year. I waited other two weeks and I wrote a second mail. I didn't received any answer. Then I called and your support service told me that I would have received my order last week. At the moment I'm still waiting for my order which is more than two months that it's signed as ready. As company, you are treating clients which have already paid in an unprofessional way. At the moment I'm really disappointed by the service and I'm really concerned about the professionality of the service.

     

    Regards,

    Andrea

     

×
×
  • Create New...