matthew22
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by matthew22
-
-
If you want a easy firmware creator (just in case you plan to change something in the future), you could try the @Amedee firmware generator, I works like a charm
dose it work with a DIY heated bed beacuse normal software dosnt I don't think
I used this http://marlinbuilder.robotfuzz.com/ -
dose it work with a DIY heated bed beacuse normal software dosnt I don't thinkIf you want a easy firmware creator (just in case you plan to change something in the future), you could try the @Amedee firmware generator, I works like a charm -
the thing is I have used costem marlin hex builder to make firmware beacuse I have a DIY heated bed so I think I will try build another one and see what I can do thanks for reminding me hahaIf it's just a question of the orientation of the motors (no direct drive),uploading the newest firmware with Cura will solve your 'issue'... -
this is causing it to leak :/Me, I turn just the metal screw on the head... -
hey everyone i bought a Ultimaker with inverted axis a while ago but it doesn't fit where i want to put it because the steppers are sticking out and i have put it back to original form on the inside of the case but that reversed the way it moves and was wondering how to put it back?
-
I have a Ultimaker original and I have put the second extruder on but the second is much higher than the other and when I losened it alittle it stated leaking I cant tighten the other anymore to make it higher I was going to try heat proof lock tight and make it so I can loosen it with out leakage to make it level but I was wondering if anyone had any ideas first
and I have also tryed Teflon tape aswell.
re invert x and y axis to original state
in UltiMaker Cura
Posted
i figured it out guys thanks heaps for all your help