titanservices
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by titanservices
-
-
So I tightened all the screws, including the screws on the motor. But it's still happening.
Happens within only 3-4 layers before it screws up.
-
Hi,
I got my Ultimaker 2 in Janurary, and have been getting good quality prints for the past 4 months.
I am attending a trade show this weekend, and was invited to bring my 3d printer, so in anticipation, I have printed about 10 objects for example.
Suddenly, starting yesterday, I have been having a problem where the extruder is printing just fine, and then suddenly I hear a kind of grind sound, like the belt is slipping, and the whole nozzle and everything moves to the right about 10mm. And it keeps printing like nothing happened. I have attached a photo. I was printing a vase that should be straight up.
I did buy some sewing machine oil and did oil the x and y shafts, but its still bad.
Any help for this newbie before my show on Friday????
-
Great, I was looking for an option like that.
The main piece does come off the heatbed. And it is heated. I will try printing with a brim.
-
Hi,
This is my first post with Ultimaker.
I am fairly new to the 3d printing world. In Janurary this year I got my Ultimaker 2. I have printed quite a few things over the past few months, learning as I go.
But I am having a huge problem with one part that I am trying to print. I have failed at least 6 times. And I need some advice.
The file I am trying to print is this:
https://www.dropbox.com/s/zsn96gard590bvq/skirt.stl?dl=0
And everytime I try to print, I get this:
https://www.dropbox.com/s/jk7f4eca2u3c308/2015-03-19%2008.48.20.jpg?dl=0
I am using mostly default settings, except the layer height is 0.06mm, and speed is 30mm/s.
If I print without supports, I get that result everytime.
If I add supports, it fails even quicker.
I have also tried glue from the glue stick, as well as hairspray, same issue.
Any suggestions?
Extruder getting off course
in UltiMaker 3D printers
Posted
Any help?
I printed an octopus twice and both prints had issues at the same layer.
So I tried a shorter model. Printed the whole thing, but I had Cura set to do two models. First model went well, but the second failed in 2-3 layers.
I have no idea why.
Ideas?