Jump to content
Ultimaker Community of 3D Printing Experts


  • Posts

  • Joined

  • Last visited

ciceronian's Achievements



  1. I'm having an issue with a print. I've been trying to get it going all morning, and every time, I have the same problem. As it travels, a tiny bit of filament comes out (you can see it happen around 0:16 in the video), which then gets in the way of the next layer going down. It only gets worse from there. It also leaves a little bit of filament on the print bed on the way to the next print area. Settings (doing this for another user who chose the settings): Layer height - 0.1 Shell thickness - 5.6 Retraction enabled and set to 0 on minimum travel and minimum extrusion Fill density - 50% Print speed - 50 mm/s (have tried it at 40 and 30 with the same results) What I have tried: - Re-leveling the print bed - Reducing the temp to 200c - Atomic method of cleaning the nozzle (was already relatively clean) - More adhesive on the print bed
  2. Very helpful. I'm hoping everything starts making more sense as I get into it.
  3. You're exactly right. The Inner shell speed is set at 80. I'll try it on a lower speed and see if that solves the problem. I appreciate your help!
  4. Our printer is only a few months old. I rarely change from the "Quickprint" settings so far, as I am still learning how everything works. So, on the Cura's default settings (whether I'm doing a high-quality or fast print), I keep having an issue where the infill is not coming in right. The exterior of the print looks perfect. Below is an example of what I mean. (Ignore the burnt bits - I had just switched materials, and the nozzle was having a little trouble with the new stuff at first, but it sorted itself. Can anyone tell me why this is happening?
  5. We just got the Ultimaker 2 a couple of weeks ago. I've been testing it out, using the files that came on the SD card. Unfortunately, when I loaded a file of my own, it corrupted the card, and I had to format it in order to use it again. Does anyone know where I can get the original files that came with the card? (It included the Ultimaker robot, an earring, the Coffin's Cube, a stackable cup, and a few others.)
  • Create New...