-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by kr15_uk
-
-
Ladies and gents,
Quick one.
Cura only does USB printing via FTDI hardware or I have any chance of getting it to work via CH430/341?!
Thanks.
Kris
-
Unfortunately none of the settings in Cura reduces this very annoying Z seam.
I've changed all the possible settings in Cura but with no success so far...
-
-
@DaHai8 - Thanks for the reply.
My Cura settings are pretty much unchanged apart from temp, supports and infill.
I've tried to disable Combing - still the same.
Tried to increase and decrease retraction mm and speed - still the same.
By now I think I've tried to change all possible settings in Cura just out of desperation but still the same thick corner in cube's case or just thick Z seam on any another print.
-
-
-
Ladies and gents,
Question about Cura 2.1.2 and Z Seam - on some of the prints it looks like a thick blobby line.
For example calibration cube, one corner is complete blob all the way up.
I'm pretty certain that this wasn't happening on older versions of Cura and I'm certain that it's not a printer thing either because it works fine with Simplify 3D.
Same STL - 2x completely different results.
Am I missing something what I need to tweak?!
Thanks.
Regards,
Kris M
Weird zhop type movement in vase mode (Cura 2.4)
in UltiMaker Cura
Posted
@Nicolinux - what is that gcode preview software you are using?!
Thanks.