[Mesa aquecida na 2Go]

Boa tarde pessoal, tenho um Ultimaker 2Go desde 2016, e agora estou pensando em instalar nela uma mesa aquecida, alem do termistor e a mesa o que mais preciso?
Sei que as ligacoes na placa já existem mas não deve estar liberados no firmware, alguem tem uma ideia?
Grato

[Cannot select a Part]

I have the same problem, does anyone have any solution. I'm getting to work more or less using the app in low resolution, giving less problems.

[Cura 4.8 on macOS 11 Big Sur; cannot click (or in any other way interact with) objects.]

I have the same problem, does anyone have any solution. I'm getting to work more or less using the app in low resolution, giving less problems.

[Gcode 3.4.1]

Could you tell me if you can remove these lines?

;Generated with Cura_SteamEngine 3.4.1
;M82 ;absolute extrusion mode
;M190 S105 ;Uncomment to add your own bed temperature line
;M109 S225 ;Uncomment to add your own temperature line
G90; EXTRUSORA NO POSICIONAMENTO ABSOLUTO
M83; EXTRUSORA NO MODO RELATIVO
M106 S255; LIGA VENTILADOR
G4 P500; PAUSA MOVIMENTO
M106 S0; LIGA VENTILADOR
M140 S105; TEMPERATURA DA MESA
M190 S105; AGUARDA MESA AQUECER
M109 S100; FAZ AQUECIMENTO DO BICO
M104 S225; FAZ PRE AQUECIMENTO DO BICO
M402
G28; HOME GERAL
M400
G29 V4 T ; AUTO NIVELAMENTO
M400
G1 X1 Y1 Z0.8 F1000; VAI PRA PONTO DE PURGA
M109 S225; FAZ AQUECIMENTO DO BICO
G92 E0; RESETA EXTRUSOR
G1 X1.0 E9.0 F1000.0 ; PURGA
G1 X100.0 E12.5 F1000.0 ; PURGA
M117 IMPRIMINDO...
M400
G1 E-6.0000 F4200
G1 Z0.600 F3000
T0
▶︎ E0◀︎

▶︎ F1500 E-6.5◀︎

;LAYER_COUNT:654
 

[Gcode 3.4.1]

You did it right, thank you very much.

[Gcode 3.4.1]

The gcode does not work as expected in Cura 3.4.1

 

 

It's like this in the Start code

;Sliced at: {day} {date} {time}

;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}

;Print time: {print_time}

;Filament used: {filament_amount}m {filament_weight}g

;Filament cost: {filament_cost}

;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line

;M109 S{print_temperature} ;Uncomment to add your own temperature line

G90; EXTRUSORA NO POSICIONAMENTO ABSOLUTO

M83; EXTRUSORA NO MODO RELATIVO

M106 S255; LIGA VENTILADOR

G4 P500; PAUSA MOVIMENTO

M106 S0; LIGA VENTILADOR

M140 S{print_bed_temperature}; TEMPERATURA DA MESA

M190 S{print_bed_temperature}; AGUARDA MESA AQUECER

M109 S100; FAZ AQUECIMENTO DO BICO

M104 S{print_temperature}; FAZ PRE AQUECIMENTO DO BICO

M402

G28; HOME GERAL

M400

G29 V4 T ; AUTO NIVELAMENTO

M400

G1 X1 Y1 Z0.8 F1000; VAI PRA PONTO DE PURGA

M109 S{print_temperature}; FAZ AQUECIMENTO DO BICO

G92 E0; RESETA EXTRUSOR

G1 X1.0 E9.0 F1000.0 ; PURGA

G1 X100.0 E12.5 F1000.0 ; PURGA

M117 IMPRIMINDO...

M400

G1 E-6.0000 F4200

G1 Z0.600 F3000

T0

Why are you leaving like this?

;FLAVOR:Marlin
;TIME:35423
;Filament used: 85.3195m
;Layer height: 0.2

;POSTPROCESSED
;ChangeAtZ instances: 1
;Generated with Cura_SteamEngine 3.4.1
▶︎M190 S115 ◀︎
▶︎M104 S250◀︎
▶︎M109 S250◀︎
M82 ;absolute extrusion mode
;Sliced at: Thu 12-07-2018 15:09:50
;Basic settings: Layer height: 0.2 Walls: 1.5 Fill: {fill_density}
;Print time: 09:50:23
;Filament used: [85.32]m [225.7392328125]g
;Filament cost: [0]
;M190 S110 ;Uncomment to add your own bed temperature line
;M109 S225 ;Uncomment to add your own temperature line
G90; EXTRUSORA NO POSICIONAMENTO ABSOLUTO
M83; EXTRUSORA NO MODO RELATIVO
M106 S255; LIGA VENTILADOR
G4 P500; PAUSA MOVIMENTO
M106 S0; LIGA VENTILADOR
M140 S110; TEMPERATURA DA MESA
M190 S110; AGUARDA MESA AQUECER
M109 S100; FAZ AQUECIMENTO DO BICO
M104 S225; FAZ PRE AQUECIMENTO DO BICO
M402
G28; HOME GERAL
M400
G29 V4 T ; AUTO NIVELAMENTO
M400
G1 X1 Y1 Z0.8 F1000; VAI PRA PONTO DE PURGA
M109 S225; FAZ AQUECIMENTO DO BICO
G92 E0; RESETA EXTRUSOR
G1 X1.0 E9.0 F1000.0 ; PURGA
G1 X100.0 E12.5 F1000.0 ; PURGA
M117 IMPRIMINDO...
M400
G1 E-6.0000 F4200
G1 Z0.600 F3000
T0
G92 E0
G1 F1500 E-6.5

[Temperature of the first layer]

The temperature of the first layer does not change on the machine nor on the gcode despite being specified in the software.

[Z hop when retracting in Cura 2.6]

were Z hop when retracting in Cura 2.6???