[**SOLD** Selling two Ultimaker 3's with extras - SoCal - LA]

Selling my two Ultimaker 3 machines.  Great machines but I am moving on to SLA printing.  Have not used them in over a year but I have tested them and they are still operational.  May need to be lubricated.  Prefer a local buyer in Los Angeles area that can pickup locally but can ship (Buyer pays shipping costs).  I have the original box for one of them.  Asking for $4200 + Shipping.  Will only ship within the continental 48 states.

 

Thank you

 

Ultimaker 3 #1

- GeckoTek Solid magnetic bed mount with removable metal sheet

-BondTech Dual Drive Extruder installed

- .4 AA Nozzle lightly used

- .25 AA Nozzle (used once)

- .4 AA and .4 BB (Installed) used

- Printed Solid Top and door enclosure kit

 

Ultimaker 3 #2

- BondTech Dual Drive Extruder kit (Not installed)

- (Two) .4 AA Nozzle (New)

- .4 AA Nozzle and .4 BB Nozzle (Installed) used

- Printed Solid Top and door enclosure kit

 

BONUS - Alot of new/used filament including a 5kg White PLA Spool from Matterhackers.  Other spools from Matterhackers, Atomic Filament and Ultimaker

 

 

[Broke one of the connectors on my UM3 Heatbed]

Thanks everyone for the advise.  I'm not too skilled at soldering so I just ended up buying a new replacement.  That said, I will practice my soldering skills now that I have this spare board ;)

[Broke one of the connectors on my UM3 Heatbed]

Instead of buying a whole new heatbed for $180, is there an adhesive I can use to repair this?

 

[Breakaway support material]

Thank you!  It allows me to change it but wasn't sure if it would actually force it to print at that resolution. 

[Breakaway support material]

I recently purchased this material and it works great, but when it's loaded, it limits Extruder 1 to print at .15 or .20 layer height.  I could not find anything where it stated that you could only print at this layer height when using the breakaway material.  If I switch extruder 2 back to PVA or PLA, I'm able to print at higher resolutions.  I just want to make sure this is the case when using this support material.

Thanks!

[Auto level failure]

I recently had this happen to me over the weekend and coincidentally right after I updated the firmware too. Fortunately, after I try to print the part again the 2nd time, it works fine and successfully completes it. I may just reset the printer back to Factory defaults and try to manually level it and see what happens. Then after a few prints, I'll have it autolevel again and try printing again to see if the error appears.