Jump to content

Den door

Dormant
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

 Content Type 

Posts posted by Den door

    What can i do about that ?

    in Improve your 3D prints

    Posted

    Ok, thanks everybody for the excellent reply’s. I cleaned the glass perfectly and I leveled the bed with some precision tools shown on the picture.

    After that I did a testprint and now it’s perfect. No warping, curling, just the way it used to be.

    I used the 0,15mm to level the bed with the nozzle ?. That seems to be the perfect match ??

     

    In the future this will be my way to go ??

     

    Thanks ! and keep on printing ?

    6F1C300D-CBA7-46F2-981B-CE11BF76968B.jpeg

    7ECC3C3A-270A-49E0-997F-BE78E5CCB9BA.jpeg

    2B9020D8-0196-43EB-ABC7-73082AA0F4C2.jpeg

    What can i do about that ?

    in Improve your 3D prints

    Posted · Edited by Den door

    10 minutes ago, Nicolinux said:

    Hi, it could be that the bed is not leveled correctly. Check out this guide:

    https://ultimaker.com/en/resources/17083-bed-levelinghttps://ultimaker.com/en/resources/17083-bed-leveling

    No the bed is perfectly leveled, I checked before I did this print after I cleaned the glass. It begin always in the same corner. I buyed the kit with the glass on the front of the printer to keep the warmt inside and avoid turbulence if somebody passes the printer. Should I use the glue ? I read that is only necessary when using ABS filament and not PLA. The first layers are perfect, then it begins to bend. The bed is set at 60 degrees celsius...

    Thanks for your reply to my question.

    Downloadable profiles

    in UltiMaker Cura

    Posted

    I am sorry, it is the Ultimaker 2+

     

    I have done a few prints and they are fine ( for the one that succeed )

    If I want to print really small objects then they come off the glass, even when I use the glue that comes in the package.

    Have to figure that out to prevent this...

     

    Thanks ! ! !

     

    Downloadable profiles

    in UltiMaker Cura

    Posted

    Hi there !

     

    I am new to the community and start to begin printing with my Ultimate 2+

    I am searching for custom profiles for PLA to download and use for detailed printing.

    Can't find anything online. Are there downloadable profiles ? 

    Working on a Mac and Cura is the latest version.

    Thanks in advance !

     

    Den Door.

×
×
  • Create New...