![](http://content.invisioncic.com/ultimake/set_resources_16/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Yousif
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Yousif
-
-
On 2/1/2018 at 5:30 AM, gr5 said:
cura preferences (not model settings) such that you can have parts overlap the same volume.
Hi gr5,
I have found the "Union overlapping volumes" in the settings and clicked it. When I put the cube around the skinny bit, it pushes the dogbones off the bed. What other setting do I need to tick?
-
Hi,
I am new to using CURA from Simplify3D. I want to print 4 of these dogbones from PP and 4 from PC. I am testing the adhesion strength between 2 shell layers. Therefore, I want to print the top and bottom at 100% infill (which will be attached to the tensile test grips) and keep the middle section hollow (0% infill) with 2 shells. I have attached the CURA file.
Kind Regards,
Yousif
-
Hi,
I am new to using CURA from Simplify3D. I want to print 4 of these dogbones from PP and 4 from PC. I am testing the adhesion strength between 2 shell layers. Therefore, I want to print the top and bottom at 100% infill (which will be attached to the tensile test grips) and keep the middle section hollow (0% infill) with 2 shells. I have attached the CURA file.
Kind Regards,
Yousif
Changing fill % at 3 different different levels
in UltiMaker Cura
Posted
@Dim3nsioneer and @kmanstudios thank you very much. It worked! Really appreciate your time.