Jump to content

OOC

Dormant
 View Profile  See their activity

  • Posts

    36

  • Joined

  • Last visited

 Content Type 

Posts posted by OOC

    TPU 95A

    in Improve your 3D prints

    Posted

    Hello Catohagen,

    The bed should be level. I just re-leveled it yesterday. The odd thing is that it only does this with the phone case and not the maker coin I have been testing.

    I will try your settings

    TPU 95A

    in Improve your 3D prints

    Posted

    Here are some pics Sandervg. I’m having so much trouble printing this phone case. Right now in the second pic, you can see it’s printing super fine and light so it’s tansparent.

     

    Shurik, are you using Cura default settings and just changing the items you listed for the TPU 95a filament?

     

    Thank you both for he response.

     

     

    CAEE592B-BE16-4E90-904A-71FA60B1B968.jpeg

    C3DB9783-93AF-48AB-BE3D-867D8D5C4A3B.jpeg

    TPU 95A

    in Improve your 3D prints

    Posted · Edited by OOC

    Hello all,

     

    I'm not sure if this is possible, but can we share build files? Meaning the settings for a certain type of Filament? If so, does someone happen to have a file for printing TPU95 A? I am having a hard time getting started. Nothing I seem to do is working. I cant get this stuff to print to save my life. Even with the pre selection in Cura. I've turned off  "retraction" adjusted temps and just no luck at all. The print seems to make it to about halfway through the second layer of this phone case and just stops printing.

     

    Ive also noticed that the Filament is feeding through very slow through the back of the machine. Extremely slow 

     

    Any advice would be greatly appreciated :) 

    Thanks

    Printing Issues

    in Improve your 3D prints

    Posted · Edited by OOC

    Thank you Yellowshark.  I will try this.   

    Im printing a benchy right now. I ready that night that then benchy should tell you any problem areas with your printer.

     

    i went out and bought a Infrared Thermometer like you sugggested to test the bed.

     

    Here are my findings.

    front of bed is 131 F

    left side of bed 131 F

    back of bed 132 F

    right side of bed 134F

     

    these vary 1-2 degrees.

    Printing Issues

    in Improve your 3D prints

    Posted

    Hello all,

    The base of my prints are coming out really rough. I’ve leveled the bed several times and I can’t seem to fix this. I’ve tried recommended settings and still the same result.

     

    I use glue on the bed with it spread out with warm water so it’s thin. I’m not sure where to go from here.  I’ve attached a picture of two different prints to show.

     

    Thanks for your time.

    John

     

    C708CB4F-9B33-4D90-AEA3-0F84EF52049B.jpeg

    C72652E5-E6B2-4601-9B52-F2922E0EFC06.jpeg

    Second Print on new printer

    in Improve your 3D prints

    Posted

    Hello all,

    My first print was the UM3 robot that came with the USB drive. It came out great.

    So I decided to print another piece and on the image below you can see that print was messing up. The part that you are seeing is the base of the print that touches the glass bed. For some reason its printing bumps and lifting up from the print bed. I thought I would try a second print and I received the exact same results from the print bed.

     

    ***Before print*** I cleaned the glass with soap and water and dried it really well. Then I used a very light layer of glue on the print bed.

     

    Can someone please tell me why this is happening? 

     

    Thanks

    Flat piece Messed up.jpg

    Cura vs Simplify3D

    in Improve your 3D prints

    Posted

    Hello all,

     

    I wanted to ask the community about their preference regarding Cura vs Simplify3D. A buddy of mine suggested to me today that Simplify3D was the much better way to go than Cura and he listed all of these benefits to Simplify3D. Now, I am new to 3D printing and slicers. Does anyone have experience with both of these and can share their opinion? Is the extra 150 dollars worth it to get Simplify3D? Does Cura do all the same things as Simplify3D?

     

    Thanks.

     

    Carbon Fiber

    in Improve your 3D prints

    Posted

    Ive been looking at them and from what i have seen, even the really expensive ones can only do small objects. Which isn’t really worth it to me to pay all of this money to only scan small objects.

     

    Do they make ones for scanning bigger objects like a car rim or a engine?

     

    Thanks

     

    Went ahead and bought the UM3X

    in Improve your 3D prints

    Posted

    That is awesome information. I’m going shopping tonight lol. This will be so awesome, because i have seen post on here where people have walked away from watching the printing and things go all wrong and a lot of filament is wasted.

     

    Speaking of Filament. Is it better to use UM breakaway filament or PVA for supports? The sales rep said UM breakaway is much better than PVA. He stated that UM has really taking the time to perfect this and have made huge improvements form the past. I would not know either way lol

     

    Thanks

    Carbon Fiber

    in Improve your 3D prints

    Posted · Edited by OOC

    Ok Phew....

     

    The way he was talking was that I wouldn’t be able to print carbon fiber parts at all. Thank you for clearing that up. 

    I was going to be bummed if he was right because I was super excited to print some carbon fiber car parts.

     

    Thanks

    Carbon Fiber

    in Improve your 3D prints

    Posted

    Hello all,

     

    I ordered my first UM3X and it arrives on wed. I also, order with it, the nozzle to print carbon fiber and carbon fiber filament.

     

    I was talking to and engineer at my work and we were talking about 3D printing and I expressed that i was excited to be able to print carbon fiber.

     

    He basically turned to me and said that this printer can not print carbon fiber and that I would need a 100k printer in order tor print carbon fiber. Is he correct? 

     

    If he is, this will suck because I spent the extra money for the nozzle and filament in order to be able to print carbon fiber. Did I just waste money?

     

    Thanks.

    Went ahead and bought the UM3X

    in Improve your 3D prints

    Posted · Edited by OOC

    Thank you very much for the links. Great information. I saw on one of the links that they are using a Slicer named Simplify 3D. Do you guys recommend that over the software that comes with the Ulitimaker3?

     

    Also, I saw the UM3 has a camera inside it. Can I look in on my prints from my phone when I am not home?

     

    Thanks

×
×
  • Create New...