Mihail Dimitras
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Mihail Dimitras
-
-
No i double checked it!!
-
Hello
I have an UM2 + and the problem is that when i try to print something it goes all the way up and bangs in to the nozzle . I lower the build plate from the menu and i goes down and stops , no problem with lowering the build plate. But when i'm trying to calibrate the the build plate it goes up and do not stop like an inch from the nozzle, before i use to adjust (calibrate) it by hand ,but now it bangs into the nozzle !!!!
I checked the switch at the bottom it is ok!
I checked the connections on the board for the z axis it is connected!!
What could be the problem????
-
Thanks !!!! I have the withe feeder and yes i installed the UM2 + firmware , today i reinstalled the firmware , rebooted the printer and it worked....... very strange!
-
Hello I have a few Ultimakers extended 2 + today i did a software update to them, after this when i tried to insert material in instead of pushing it forward it will extract it!!! Basically the process of inserting material inverted , same for model printing!!
SOLVED Feeder motor works reverse while printing
in UltiMaker 3D printers
Posted
Hi
I have an Ultimaker 2+ and the problem is:
When i tried to insert the material the feeder spins opposite way extracting it , and vise versa . Firmware installed is for ultimaker 2 +.