BDub
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by BDub
-
-
On 6/8/2018 at 10:52 PM, kmanstudios said:
You should have gotten a second AA core when you bought your machine.....did something happen to it?
My machine (U3ex) came with the PLA and BB.4 print core.
-
Does anyone know how well Breakaway will print from the BB print core? I'd like to avoid having to buy a second AA just to use breakaway.
-
Both tricks proved helpful. Peggy, that setting was exactly what I was looking for, and nallath, the grouping feature made handling a project with many small pieces much easier.
Thanks again to you both.
-B
-
Great! Thanks for the replies. Both of these suggestions sound helpful.
-B
-
Is there any way to turn off the shrink-wrapped model volume (gray outline)?
I want to nest parts to maximize build volume, but this "feature" is preventing it. For example if you have two L-shaped walls you can't nest them yin/yang style because the volume runs diagonally from the end of each parts walls rendering that space unusable, or if you have a ring and you want to place a part on the inside to print as well. I can see no reason this would not work.
The work around is to nest the STLs files in another piece of software and re-export them as one model, but this is a pain in the butt as you may need to adjust the individual pieces to maximize packing. Am I missing this feature, or does it not exist. Searching the forum has turned up nothing.
Thanks.
BDub
Difference between AA 0.4 and BB 0.4 nozzle
in UltiMaker 3D printers
Posted · Edited by BDub
I meant PVA earlier, but yes it was bought new. I also purchased an AA.2 nozzle at the that time, ao I do have three, but I do not recall ever having to AA .4s. I will check this evening to be certain.
@CarloK - thanks for the info. I will give it a go then.