KJohn
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by KJohn
-
-
Great explanation, but exactly does enabling this do?
-
Good Day,
Thanks for replying. I am in New Brunswick Canada. The only thing that happens is the exruder fan will turn on for approx 2 or 3 seconds, then nothing happens. The Olimex board has a red LED illuminated. I attempted to flash the firmware again with instructions from the dealer and nothing happened (no LED flashed). I suspect a bad Olimex board.
-
What temperature are you setting to print for this?
PLA print temperature is typically 185 to 205 degrees Celsius. Carbon fiber is a bit higher
Carbon Fiber Print Temperature typically is : 240-260 degrees Celsius
-
Does anyone know the make and model # of the control board used in the Ultimaker 3 extended?
We just got ours and it printed 1 thing, then the limit switch would not detect the print head on the X axis. Now the printer will not power on. I am in contact with the dealer, but I would like to have some info going into this problem.
Thanks
Artefacts consistently on my 3D prints
in Improve your 3D prints
Posted
Some of these tips might help you.
https://the3dprinterbee.com/cura-ironing/