[Ultimaker Cura 4.6 released]

3 hours ago, toothpaste said:

Total newbie. How do I add my printer (Anycubic Mega S)please. 

I downloaded 4,6,1 and I can only find Ultimaker printers. No others.

How can I add my printer profile?

1) clic add printer

 

2) Go under the Ultimaker printers, try to find a close printer

4) test, adapt....

5) or chose custom and adapt...

[Ultimaker Cura 4.6 released]

Une solution: prendre l'imprimante "Ultimaker 2+" dans la liste.

 

[Ultimaker Cura 4.6 released]

I import material from v4.3 and now when I reload app I have only one choice "Reset configuration"!!!

 

 

stay zen!

 

I remove all files from .local/share/cura/4.6/materials and .local/share/cura/4.6/extruders and I go back to previous configuration : no material!

 

stay zen!

[Ultimaker Cura 4.6 released]

Hi,

I have an Ultimaker 2 with an Olsson block.

I'm trying again to run cura 4.6.1 as well as cura 4.3 in my linux mint 19.3 PC. 🙂

I download the Ultimaker_Cura-4.6.1.AppImage and chose to add "Ultimaker 2 with Olsson Block" printer.

Then no generic materials! and impossible to create new materials! all fields are greyed out!

I can't import material from 4.3 version cura461 crashing...

 

 

Then I test with 'Ultimaker 2' printer. I have materials and a can create new material...

 

Can you help me, it's very handy to have prerecorded material.

[Cura 4.5.0 UM2 Olsson bloc]

I've conducted several tests:
Test 1
1) clean ~/.config/cura and /.local/share/cura
2) start 4.5.0.appimage
3) select the "Ultimaker 2" printer
     G-code flavor : ultimaker 2 -> No generic materials
     G-code flavor : repeater or marlin -> generic materials ok
Test 2
1) clean ~/.config/cura and /.local/share/cura
2) start 4.5.0.appimage
3) choose the "UM2 printer with Olsson Block" printer
   G-code flavor : "Ultimaker 2" or repeater or marlin -> No generic materials

 

In both tests the generic materials are installed

It works correctly in 4.3.0 version.

 

Cloud you help please!

[Cura 4.5.0 UM2 Olsson bloc]

12 hours ago, ahoeben said:

If you want to be able to select materials for the Ultimaker 2 in Cura, you have to go to Machine Settings and change the GCode FLavor to "Marlin".

It makes no difference.

 

[Cura 4.5.0 UM2 Olsson bloc]

 

Almost solved by adding "UM2 with Olsson block" printer and not a simple "UM2" printer.

 

I now have the possibility to choose the diameter of the nozzle.

 

But no more generic material when I choose this printer. the list is empty. and for the UM2 too...

What's going on?

 

[Cura 4.5.0 UM2 Olsson bloc]

Hello,

I work without problems with cura 4.3.0 appimage in Linux Mint 19.1 Cinnamon kernel Linux 4.15.0-88 with an Ultimaker 2 printer with an Olsson block.

 

Cura 4.4.0, 4.4.1 and 4.5.0 appimage have always crashed at boot time since their release. I hadn't had time to go deeper.

 

Today I decided to run version 4.5.0 and reset all Cura configurations (mv ~/.config/cura ~/.config/cura.old and mv ~/.local/share/cura ~/.local/share/cura.old) on my PC.

 

I have started cura 4.5.0 appimage without any problems I have reinstalled all the plug-ins I use .

 

My problem is that I can't tell cura 4.5.0 that the printer has an Ollson block...
in Preferences/Configure Cura/Printer no Select upgrades button

 

No " "Advanced” settings tab" as described here https://ultimaker.com/en/resources/18022-setting-up-cura

 

Thank you for your help.

[Printing very small part]

Thank you for all your answers!
You're right, when I remove coasting the material deficiencies no longer appear in cura. it's a misleading representation of cura. When I display the displacements (coasting on), these gaps are represented as displacements.
Thank you.

[Printing very small part]

Hello,
I am printing a small part. in linux cura 3.4.1 (nozzle 0.25mm), as you can see in the screenshot of cura at top and in the brim (lower left), parts of the part are missing.  Do you have any ideas?

Regards.

UM2_version-simple-pb.3mf