[Cura 3.5.1 slicing is strange]

Ask and you shall receive. I've attached pictures of what it should look like, and then what actually comes out.

 

[Repeated clogging in Ultimaker 2+]

AND on top of being so comprehensive that it should be required reading, it also solved my problem.  

 

The rear fan wasn't working.  Swapped it out for a new one and it's working like a charm!

 

Thanks for all the help!!!

[Repeated clogging in Ultimaker 2+]

Hi all,

 

I just cleared a really big clog (had to take the head apart actually) and had a great first print.

 

Since that one nice print, I'll start a print and it'll work fine for about 4-5 layers and then start underextruding.

I've done the atomic method multiple times, and it comes out clean.

 

Any suggestions?

 

Thanks in advance for any words of wisdom.

[Cura 3.5.1 slicing is strange]

I'm using Cura to slice a square with 2 open sides (it's a lid for a box to hold a small component) and Cura is consistingly slicing it strangely.

 

It only lays a brim down for half of the shape, then will try to lay down midair filament in the regions without a brim.  Obviously, not good.

 

Any tips/tricks/suggestions?

 

Thanks in advance for any advice.