Lammertus
-
Posts
10 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Lammertus
-
-
21 hours ago, Lammertus said:
I installed V3.6 a couple of days ago, it prints ok for me
since I am still learning how to use things properly.
A question I'd like to put here is about material shrinkage.
Normally with production machines you can calibrate some
test parts to obtain the shrinkage factors XYZ and configure them
into either the machine/software or into the material definition.
Is there anywhere some hidden configuration in order to
"fine" tune the geometry of the parts??
For the rest I am pritty much impressed.
Regards,
Mert
Ok, I think I fiound the solution, aparently Shrinkage factor ¨= Horizontal Expansion
either positive values or negative values.
Now testing some new industrial materials.
-
Yes, I am aware about the infinity of parameters that can be used, but
at the moment I am busy testing new materials and would like to know
if there are any possible adjustment apart from scaling the model of course.
Is there any sort of test-suite of models to print?
Thank you for your feedback!!
-
I installed V3.6 a couple of days ago, it prints ok for me
since I am still learning how to use things properly.
A question I'd like to put here is about material shrinkage.
Normally with production machines you can calibrate some
test parts to obtain the shrinkage factors XYZ and configure them
into either the machine/software or into the material definition.
Is there anywhere some hidden configuration in order to
"fine" tune the geometry of the parts??
For the rest I am pritty much impressed.
Regards,
Mert
-
43 minutes ago, WesleyE said:
The URL from Smithy is the same one that the printer accesses when it's downloaded through the network, so it should work. Additionally, could you try to download these files through another browser?
Hi WesLeyE,
Thank for helping me with this, I just re-formatted the USB-stick just in case and
downloaded the files again with Iexplorer instead of Chrome.
Now it has installed ok.
Hopefully now it works even better!!
Thanks everybody for helping me with this!
LAmmertus
-
32 minutes ago, Smithy said:
Thanks a lot Smithy, this just in case of :-)
-
14 hours ago, Lammertus said:
Yes I did, 2 files in total but no luck at all! ( 1 file is a tar.gz or something
and the second file is the .sig file )
The printer runs fine for the moment but I'd
like to have the latest firmware.
Just checked, the files are rootfs-5.1.7.20181023.tar.xz and
rootfs-5.1.7.20181023.tar.xz.sig
Is there a download site for downloading the current and maybe older versions,
just in case of??
-
40 minutes ago, Dim3nsioneer said:
Maybe try a different USB stick.
Thanks, I will try that!!
18 minutes ago, Smithy said:Or try to download it again and check if the file is still in that format. Mac Safari tries sometimes to unpack the downloaded file automatically and then it is maybe just a .tar instead of tar.gz
Network install from the printer is no option?
Unfortunately I can not connect the printer to internet due to our local network
security configurations!
Can it be done from a PC to the printer?
-
Yes I did, 2 files in total but no luck at all! ( 1 file is a tar.gz or something
and the second file is the .sig file )
The printer runs fine for the moment but I'd
like to have the latest firmware.
-
Hello all,
I just tried to install the latest firmware for the Ultimaker S5 using a
USB-stick but the printer says it can't validate the files.
These files were downloaded from the website a couple of times
but no luck!
The files are: 5.1.7.20181023
Any help on this is highly apreciated!
Kind regards,
Lammertus
Error importing profile Cura 3.6.0
in Design for Additive Manufacturing
Posted
Hello all,
Is there any fix for importing profiles in Cura 3.6.0??
I can export without problems but then importing the very
same profile gives me an errorbox:
Error al importar el perfil de E:/Mert/44 Maquinas FDM alternativas/Ultimaker/Perfiles Materiales/Novamid1030-V4.curaprofile: <message>
No se ha podido encontrar un tipo de calidad not_supported para la configuración actual.</message>
Translated: Error importing profile xxxx. It was not possible to find a type of quality not supported for
the actual configuration.
??????????
Any help on this would be highly apreciated!!
Thanks for any hint!
Mert