[My Printer changes direction]

On 1/30/2023 at 7:56 AM, MariMakes said:

Hey @doubird1,

 

Do you have a picture of your problem, and a  project file for us? It contains the printer and settings we need for troubleshooting.  To save a project file go to File -> Save project.

 

I think your issue might be solvable with the correct combing and retraction settings. 
Or you could be running into an issue similar to this one:  

i saved the project and uploaded. hope it helps to understand. 

 

barMount.gcode barMount.3mf

[My Printer changes direction]

I use cura with my Duplicator Mini i3. Most of my prints, i use a brim.  Bed adhesion is ok.  The problem i noticed is that when the brim is done, the printer changes direction to print and often leaves either a blob or a small line of filament that after gets in the way. Is there a way to fix this? Is it a Cura settings problem? Thanks for any help.

[Helping Children in Need.]

I know alot of people out there help others by either making scarfs, slippers, wooden toys,etc so I don't know how to start something like that but my idea would be that most of us on here have a 3d printer and we often get to the end of a filament roll and don't know what to print. So how about if everyone gets onboard and prints out a lego piece. If we start something like this, we could make alot of kids happy. What do you think? Anyone know how to go about this? Great things start with an idea... thanks

[Cura Profilles Help]

hi, I have a duplicator i3 and duplicator i3 Mini. I had created different profiles for each machine, but I noticed that when i make changes to the Mini ex: layer height, the changes are automatically changed for the other printer. How do I stop this from happening? thanks for your help.